X99 Extreme4 Boot failure
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=2980
Printed Date: 25 Jan 2025 at 11:03am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X99 Extreme4 Boot failure
Posted By: bre2ake
Subject: X99 Extreme4 Boot failure
Date Posted: 05 Jul 2016 at 3:25am
|
Hello, i have noticed an Boot issue since i updated the Bios on my Board to 3.40. Every time i start my rig, i become the following error message when the system where shut down for long time. The system failure to boot several times ago... My system spec´s are: Asrock X99 Extreme 4 (Bios-Chip 2.0) Intel I7 5820K (OC @ 4,3) Crucial Ballistix Sport 64GB DDR4-2400 (Modul Code: BLS8G4D240FSA) Creative Sound Blaster X-Fi Titanium Fatal1ty PCIE Asus Geforce GTX 1080 Founder Edition 8192MB Aktiv PCIe 3.0 x16 OS SSD: Samsung 850 Evo 250GB SSD used as AHCI PSU: Enermax Revokution XT 730 What can cause this Boot error message? I am very thankfull to every help. cheers
|
Replies:
Posted By: parsec
Date Posted: 06 Jul 2016 at 2:43pm
The message that you see, do you see that before Windows boots? (Do you use Windows? You did not include that in your specs. What version if you do?) The message you get, "The system failure to boot several times ago... ", seems to be the message from the Boot Failure Guard feature. The words are not all correct, I imagine you are remembering them, and they are not in your language. I am not aware of another message like that, so unless you see it when Windows is booting, it must be from the Boot Failure Guard feature. This feature (this option in the UEFI/BIOS, is in the Boot screen, and it uses the Boot Failure Guard Count option) can tell when the board cannot POST, usually because of an over clock that does not work. It then starts POST over again, and tries the number of times (1, 2, or 3) the Boot Failure Guard Count option is set to. After that many attempts to POST still fails, the message you said you see is displayed, and the default settings of the options that were changed for the over clock are used, so the PC can POST and boot normally. That is how this option normally works. It might be possible the new BIOS version has a problem and is causing this message to be displayed by mistake. Some questions for you: Is your 4.3GHz OC working when the PC boots? When you start the PC after being shut down for a long time, does it take a long time to start? Does it seem like the PC is trying to start, and then starts over again two or three times? Normally when you see that message, you also have the chance to go into the BIOS and change or fix the OC settings. Do you have that option when you see this message? If you restart the PC after it boots fine, you do NOT see this message at all, is that right? You are now using the Broadwell-E compatible BIOS version (did you update to 3.30 first, or did you just use 3.40?) with your Haswell-E processor. You can do that, but did you update to the new Intel Management Engine driver ver:11.0.4.1186 software? You must do that, or your over clock will not work. I wonder if you really have your 4.3GHz OC when Windows (?) boots now. I think that you don't have you 4.3GHz OC working because of the new 3.40 BIOS version, and the Boot Failure Guard feature is telling you that it is not working. ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|
bre2ake wrote:Posted By: bre2ake
Date Posted: 07 Jul 2016 at 3:43am
|
Hello, thanks for your answer. I use Windows 10 Pro x64. The Message come before Windows boots and if i let the system boot normaly with my oc settings the system shut down and boot a second time with default settings without my oc. If i press del and go in the BIOS and load my saved oc settings and let the system boot another time all is fine and runs very well. With my OC settings my system runs very well and i become no errors under windows or in any game/app or else. My CPU temperature is as 100% load at an maximum from 67°C on all 12 cores. If i bought the x99 extreme4 it comes with bios version 2.0 on beginning of this year. Then i update the bios to version 2.1 without this error message. This error message was shown me for the first time after the update from 2.1 to 3.3 and now with 3.4. The actual 11.0.5.1189 IME driver is already installed too. Today i have done an clear cmos over the backpanel and after that i have used the predifined overclock feature to 4.4GHz. The only thing that i have changed is that i have set the VCore from 1.31 to 1.250. But with the same result. The error message shown again. Some time the system boots normaly and take no longer as 5-7 seconds to boot completly to the desktop. The message: http://www.bilder-upload.eu/show.php?file=2cc83b-1467834343.jpg" rel="nofollow">
 |
Posted By: bre2ake
Date Posted: 16 Jul 2016 at 2:39am
| can nobody help? |