G10 iOS\Android APP update
Printed From: ASRock.com
Category: Media&User's Review
Forum Name: Networking Products
Forum Description: ASRock Networking Products
URL: https://forum.asrock.com/forum_posts.asp?TID=3107
Printed Date: 22 Nov 2024 at 1:54am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: G10 iOS\Android APP update
Posted By: ASRock_TSD
Subject: G10 iOS\Android APP update
Date Posted: 25 Jul 2016 at 4:50pm
|
iOS Release Note |
Replies:
Posted By: joop1981
Date Posted: 09 Oct 2017 at 12:07am
| Does not work for me if router is configured as AP |
Posted By: wardog
Date Posted: 09 Oct 2017 at 3:36am
" rel="nofollow -
What IP are you attempting to connect to? |
joop1981 wrote:Posted By: joop1981
Date Posted: 09 Oct 2017 at 7:41pm
|
Thanks for your question. The LAN IP is 192.168.0.142 (fixed of course) I cannot address an AP within the app. App says no G10 found although the smartphone is connected to the G10 router. I cannot find within the app other options to connect. The WAN IP I can send you by PM if required. |
Posted By: wardog
Date Posted: 10 Oct 2017 at 1:09am
|
" rel="nofollow - Have you enabled Remote Management in the G10's GUI? I would think that's what's missing here. |
Posted By: wardog
Date Posted: 10 Oct 2017 at 1:11am
|
Also, be sure you are running the latest Firmware: https://www.asrock.com/Networking/G10/support.html#Firmware" rel="nofollow - https://www.asrock.com/Networking/G10/support.html#Firmware |
Posted By: joop1981
Date Posted: 10 Oct 2017 at 6:28am
|
" rel="nofollow - Thanks. G10's firmware applied is latest 2.09 Android app today downloaded Version 2.0.0.9-08300 App is correctly registered I now have enabled Remote Management in the G10's GUI However on this sheet it is also asked for Host IP (default 0.0.0.0) and port: (default 80) My Android phone with app got dynamic address 192.168.0.104 The Default gateway is 192.168.0.113 DNS1 is also 192.168.0.113 Routers address is 192.168.0.142 in AP mode (fixed address, DHCP disabled) and there is an external IP adress from my ISP : 24.132.xxx.xx What should I fill in for Host IP on Remote Management sheet ? And port 80 is always correct?
|
Posted By: wardog
Date Posted: 10 Oct 2017 at 9:21pm
|
I'm not so sure you can land in the GUI from an internal IP, so you should use the external 24.132.xxx.xx Also, please, PLEASE, keep in mind that by enabling Remote Management you have "opened' a chasm of a security hole with which mischievous actors can do nasty things with. I myself leave it Disabled for just that reason. Passwords are broken, and I do not want that risk. It's a gadget to visit the GUI. But nothing beyond fascination IMO. |
Posted By: joop1981
Date Posted: 11 Oct 2017 at 7:15am
|
Clear. That's true. You should not open your data for the rest of the world by using the WAN IP. Thanks.
|