Z170 F1 To Continue
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=3116
Printed Date: 28 Sep 2024 at 1:04am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Z170 F1 To Continue
Posted By: LutaWicasa
Subject: Z170 F1 To Continue
Date Posted: 27 Jul 2016 at 4:01am
|
When I boot I get the following message Intel Lan Mac Addresses are Invalid In Both CMOS and Flash F2 or Del to Run Setup F1 to Continue So.....whazzat? ------------- I7 6700K Z170 Extreme6 2x8 GSkill Rip Jaw 3200 Samsung 512 950Pro NVME EVGA 1070 FTW |
Replies:
Posted By: wardog
Date Posted: 27 Jul 2016 at 5:27am
|
For this contact ASRock Tech Support at http://event.asrock.com/tsd.asp" rel="nofollow - http://event.asrock.com/tsd.asp They will return a program and text file defining its use. Pretty straightforward to use. |
Posted By: LutaWicasa
Date Posted: 27 Jul 2016 at 5:46am
Thanks much...hopefully not too long a wait  ------------- I7 6700K Z170 Extreme6 2x8 GSkill Rip Jaw 3200 Samsung 512 950Pro NVME EVGA 1070 FTW |
Posted By: LutaWicasa
Date Posted: 28 Jul 2016 at 1:18am
|
No response as yet....any idea as to usual turnaround time on a report? ------------- I7 6700K Z170 Extreme6 2x8 GSkill Rip Jaw 3200 Samsung 512 950Pro NVME EVGA 1070 FTW |
Posted By: LutaWicasa
Date Posted: 30 Jul 2016 at 8:54pm
|
Still not a peep ------------- I7 6700K Z170 Extreme6 2x8 GSkill Rip Jaw 3200 Samsung 512 950Pro NVME EVGA 1070 FTW |
Posted By: wardog
Date Posted: 30 Jul 2016 at 10:01pm
|
Let me see if I can rattle their cage for ya. |
Posted By: wardog
Date Posted: 30 Jul 2016 at 10:18pm
|
Damn. Sorry. I discovered it's online already. My bad. First, http://www.asrock.com/support/faq.asp?id=415" rel="nofollow - http://www.asrock.com/support/faq.asp?id=415 Then follow the link on Step 2. You want MAC Tool 1.61B for your MB. But read and follow the above link FIRST as you need to write on paper the correct MAC ID of your specific MB. If you need further help feel free to ask. |
Posted By: LutaWicasa
Date Posted: 31 Jul 2016 at 9:41pm
Couldn't tell ya if that works or not...this morning when I booted up that message didn't appear.  ------------- I7 6700K Z170 Extreme6 2x8 GSkill Rip Jaw 3200 Samsung 512 950Pro NVME EVGA 1070 FTW |