990FX killer/3.1 - Killer E2200 Not Gig
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=3384
Printed Date: 23 Dec 2024 at 4:15pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: 990FX killer/3.1 - Killer E2200 Not Gig
Posted By: michalis888
Subject: 990FX killer/3.1 - Killer E2200 Not Gig
Date Posted: 06 Sep 2016 at 9:02pm
|
Hi Guys, I noticed that my network card is not working as a gigabit card, but as a fastethernet. Has anyone faced this issue? In the propertied menu i dont even have the option to manually set the card to operato to 1Gbps. I have tried the drivers from the Support site and the drrivers from killers's site. Thank you in advance
|
Replies:
Posted By: parsec
Date Posted: 06 Sep 2016 at 9:55pm
What is showing you that your network connection speed is 100Mb/s, and not 1000Mb/s? Is the connection between your router or switch and the PC a 1000Mb/s connection? It's possible that a power saving option in the E2200 Properties is reducing the speed to 100Mb/s. I'm surprised there is no speed option in the Properties of the E2200. If you are using Windows 10, and have updated the E2200 driver, that can cause problems. If that applies to you, take a look at this guide: http://www.asrock.com/support/note/KillerLan%28v1.1.52.1451%29.pdf" rel="nofollow - http://www.asrock.com/support/note/KillerLan(v1.1.52.1451).pdf ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|
michalis888 wrote: