N68-GS4 FX & Graphic Cards
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=3395
Printed Date: 01 Sep 2025 at 1:48pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: N68-GS4 FX & Graphic Cards
Posted By: budasifra
Subject: N68-GS4 FX & Graphic Cards
Date Posted: 08 Sep 2016 at 4:56am
|
I just bought a prebuild pc with the N68-GS4 FX in it and it has a NVIDIA GeForce 7025 as a graphic card. I know this is a crappy engine altogether & I want to upgrade my graphic card (I want to use After Effects). AE supporter graphic cards are:
I'm looking for something budget friendly but a graphic card that its going to do the job for me at least for a good time. Can I install any of this hardware in my N68-GS4 FX without problems? (size, compatibility, etc) PS: Sorry for my english!
|
Replies:
Posted By: wardog
Date Posted: 08 Sep 2016 at 5:40am
|
The below thread at the After Effects Forum on Adobe.com discusses the ins and outs of why that ~$1000.00 Quadro 5800 isn't needed when using After Effects. http://forums.adobe.com/thread/1417307" rel="nofollow - https://forums.adobe.com/thread/1417307 |
Posted By: parsec
Date Posted: 08 Sep 2016 at 9:53am
Your pre-built PC with the ASRock N68-GS4-FX board has a NVIDIA® GeForce 7025 / nForce 630a chipset in it, which combines a graphics chip with the processor support chipset in one package. This board has one VGA output on the IO panel. This PC was sold as a gaming PC? It does not have a graphics card in it now, just a low-end, combination graphics chip/platform support chip. That chip is considered obsolete and no longer manufactured and supported by Nvidia, for several years. The next situation is your board has one PCIe x16 slot for a graphics card. That is good, but the interface is PCIe 1.0. Current graphics cards are using PCIe 3.0, and some of the graphics cards in your list use PCIe 2.0. Usually a PCIe 2.0 and PCIe 3.0 graphics card will function on a PCIe 1.0 interface, although it is much slower than the two newer interfaces, and the graphics card will not perform at anywhere near its full potential. Ignoring the Quadro cards, which are made for professional CAD/CAM use, not video gaming, and are very expensive, the GeForce graphics cards you listed are older models, out of production. You can find some of them still for sale occasionally, otherwise you can check the used market. There is nothing special about any of the cards you listed, they are all typical graphics cards, but they are either PCIe 2.0 or PCIe 3.0 type cards. The AE list of supported cards no doubt assumes the mother board will provide them with the proper PCIe interface, which your mother board does not do, sorry to say. ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|
budasifra wrote: