Did i break the MB£
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=34473
Printed Date: 15 Jan 2025 at 7:12pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Did i break the MB£
Posted By: glepa
Subject: Did i break the MB£
Date Posted: 08 Apr 2024 at 1:34am
|
Hi, i was trying to change out a end of life m2. ssd and suddenly it seems the standoff fell off. and it look like this now on the board: https://imgur.com/a/iiy71po" rel="nofollow - https://imgur.com/a/iiy71po Seems the rest of the standoff it is now lodged in the hole. Any ideas on how to get it out? |
Replies:
Posted By: glepa
Date Posted: 08 Apr 2024 at 1:36am
| btw the board is a asrock x299 oc formula |
Posted By: Darkje
Date Posted: 08 Apr 2024 at 2:09am
|
how does it took from the backside of the board? maybe you can unscrew the standoffs and switch them out? ------------- https://valid.x86.fr/pxh0an" rel="nofollow"> 
|
Posted By: glepa
Date Posted: 08 Apr 2024 at 2:37am
|
Hard to see without taking out everything. Was hoping for some answers that confirms the possible solution of switching out the standoff from the back before doing all the work. |
Posted By: Darkje
Date Posted: 08 Apr 2024 at 3:01am
|
I tried to find some descent pictures of the backside, but they are too small to judge by. It doesn't look like screwed, might just be pressed in the hole, but not sure. ------------- https://valid.x86.fr/pxh0an" rel="nofollow">
|