Intel Motherboards - X99 Taichi not working with GPU

Print Page | Close Window

X99 Taichi not working with GPU

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=3498
Printed Date: 20 Jul 2025 at 7:15pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: X99 Taichi not working with GPU

Posted By: niro
Subject: X99 Taichi not working with GPU
Date Posted: 28 Sep 2016 at 6:29pm

I am facing a trouble with x99 Taichi motherboard. This is a new mother board and this is the 1st try. I used SSD m.2 memory and processor is

i7 6800k. After install the drivers the machine get freeze.

first I tried with win 10 64bit

**** GTX 1080

1) I used 368.69 drivers which comes with the DVD, then i tried with the 372.90 new version downloaded from http://www.geforce.com/drivers" rel="nofollow - - http://www.geforce.com/drivers

2) I updated windows and tried

3) I used ddu uninstaller and tried again

4) then I reinstall OS and tried with windows 8.1 and windows 7 different OS

5) Finally I changed the GPU

I tried same procedure with GTX 1060,

with GTX 1060 also I am facing the same problem. Without installing drivers or updating the windows, machine is working without getting freeze (stuck). But whenever I instal the drivers problem will be occurred.

Note: I tried with another two motherboard, all the GPU are working fine.

Anyone suggest any thing that might help with this?

Thanks

Replies:

Posted By: wardog
Date Posted: 28 Sep 2016 at 7:53pm

Along the bottom edge of the MB, below PCIE5, are your two BIOS chips, covered by stickers with printing on the stickers.

This printing will denote the BIOS revision that the MB left the factory with.Assuming you have not yet flashed to the current BIOS revision already, what is printed on these two stickers?
Note: They will have the same printing on both.

Posted By: wardog
Date Posted: 28 Sep 2016 at 7:54pm

Also, what PSU is it you have, and how old is it?

Posted By: niro
Date Posted: 29 Sep 2016 at 11:43am

I updated the BIOS to the new version.

MB details: http://asrock.pc.cdn.bitgravity.com/Manual/X99%20Taichi.pdf

Posted By: niro
Date Posted: 29 Sep 2016 at 11:51am

PSU is a new one. 650W

the model is NE650C

Thanks

BTW; Nvidia suggested to disable the safe boot. I tried no result