uefi default have been loaded
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=3556
Printed Date: 24 Apr 2024 at 11:37am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: uefi default have been loaded
Posted By: civsen
Subject: uefi default have been loaded
Date Posted: 08 Oct 2016 at 7:10pm
|
please healp me.... my rig is - procie fx8150 - mobi asrock 970 xtrme4 - memori 8gb - hdd 1 tb x3 my computer can not get into Windows 7, when after passing ASROCK see out the word "UEFI defaults have been loaded" "f2or del run setup ... press f1 to load defaults value and continue" when pressing F1 immediately restart. |
Replies:
Posted By: parsec
Date Posted: 08 Oct 2016 at 8:54pm
So your PC just started to do this for some reason? When the "UEFI defaults have been loaded... " message appears, that normally means the UEFI/BIOS has been cleared, or a UEFI/BIOS update has just been done. Did you accidentally press the clr CMOS button on the board's IO panel? Or did you update the UEFI? Next, when the board restarts like it is doing and prompts you to press F2 or Del to run (the UEFI) setup, it normally means there is a UEFI option that needs to be changed to allow the PC to boot. Do you use a non-default UEFI option setting that must be set, such as RAID for the SATA mode? This can also mean there is a problem, such as the boot order is not set correctly, or the boot drive has a problem. Did you try pressing F2 or Del to start the UEFI user interface, and checking if the boot order is correct? Or check the Storage Configuration screen in the UEFI, to see if the OS drive is still shown there? Or are any other drives missing? Your board has the Dr Debug display, in the lower right corner. Do you see a code on that display, when you see that message on the screen? ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|
civsen wrote:Posted By: civsen
Date Posted: 09 Oct 2016 at 9:16pm
|
thanks for the response .... CMOS clear button is active . update bios From P2.6 To p2.8, BECAUSE Want Of Trying whether bios error. bios clear from setting jumpers, Just setting Saved Time And Date can, BUT settings such as enable and disable lying NOT Tucked ... codes debug the last is 99 |
Posted By: parsec
Date Posted: 09 Oct 2016 at 9:38pm
I'm sorry, but I do not understand what you wrote, this: Just setting Saved Time And Date can, BUT settings such as enable and disable lying NOT Tucked. The last Dr Debug code is the only one that matters. Code 99 means there is a problem with a PCIe device. Do you use a video card? Do you have any other cards in the PCIe slots? ------------- http://valid.x86.fr/48rujh" rel="nofollow">
|