PWM_CFG1 header on Asrock Z170M Pro4
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=3700
Printed Date: 26 Dec 2024 at 6:53pm Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: PWM_CFG1 header on Asrock Z170M Pro4
Posted By: AhmadNaim93
Subject: PWM_CFG1 header on Asrock Z170M Pro4
Date Posted: 31 Oct 2016 at 8:18pm
" rel="nofollow - Hi, what does the header do? Im currently using 240mm radiator and out of fan header on motherboard. Im trying to avoid connecting fan/pump directly to psu. What does the mentioned header do? The motherboard manual doesnt mention anything about the header.
|
Replies:
Posted By: parsec
Date Posted: 01 Nov 2016 at 12:55am
AhmadNaim93 wrote:
" rel="nofollow - Hi, what does the header do? Im currently using 240mm radiator and out of fan header on motherboard. Im trying to avoid connecting fan/pump directly to psu. What does the mentioned header do? The motherboard manual doesnt mention anything about the header. |
That is a good question, what is the PWM_CFG1 header on the Z170M Pro4 board. I can't find it in the manual either.
All I can tell you at this point is the H/W Monitoring screen in the UEFI has a CPU_FAN 2 configuration option, and the general Fan-Tastic Tuning fan header configuration feature. My best guess is the PWM_CFG1 header is actually the CPU_FAN 2 header.
You should be able to configure that fan header independently in the H/W Monitoring screen, and use it for a fan or pump, as long as the pump's current/power draw is below 1 Amp, or 12Watts at 12V.
------------- http://valid.x86.fr/48rujh" rel="nofollow">
|
Posted By: wardog
Date Posted: 01 Nov 2016 at 3:15am
PWM_CFG1 is NOT a fan header. Forget it's even there.
That "port' is what the factory uses to program each boards PWM settings. As most boards use the same controller it is easier for them to program each board while it's in the production line rather than to have individual bins of this and that boards specifically programmed controllers.
|
Posted By: AhmadNaim93
Date Posted: 01 Nov 2016 at 12:25pm
@parsec, CPU_FAN2 doesnt listed on my UEFI.
@wardog, thanks for the clarification.
|
Posted By: parsec
Date Posted: 01 Nov 2016 at 10:20pm
AhmadNaim93 wrote:
@parsec, CPU_FAN2 doesnt listed on my UEFI.
@wardog, thanks for the clarification. |
Well, that confirms it.
------------- http://valid.x86.fr/48rujh" rel="nofollow">
|
|