Asrock G31M-GS R2.0 will not boot with 4 + 4gb
Printed From: ASRock.com
Category: Media & User's Review
Forum Name: Intel Motherboards
Forum Description: ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=3764
Printed Date: 10 Dec 2025 at 11:33am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Asrock G31M-GS R2.0 will not boot with 4 + 4gb
Posted By: duall
Subject: Asrock G31M-GS R2.0 will not boot with 4 + 4gb
Date Posted: 08 Nov 2016 at 9:46pm
G31M-GS R2.0 will not boot with 4 + 4gb
   If I put a memory of 2gb and a module of 4gb I get this in the bios, boot but only shows that  any solution? Thank you
|
Replies:
Posted By: Xaltar
Date Posted: 08 Nov 2016 at 11:14pm
|
" rel="nofollow - What BIOS version are you running on your board? ------------- 
|
Posted By: duall
Date Posted: 09 Nov 2016 at 7:05am
The latest version, 1.9 http://www.asrock.com/mb/Intel/G31M-GS%20R2.0/?cat=Download&os=BIOS my module   |
Xaltar wrote:Posted By: Xaltar
Date Posted: 09 Nov 2016 at 3:38pm
|
" rel="nofollow - If you install only the 4gb module does it detect as 4gb? -------------
|
Posted By: duall
Date Posted: 09 Nov 2016 at 4:59pm
| With the 4gb module alone, does not even turn on |
Posted By: wardog
Date Posted: 09 Nov 2016 at 5:21pm
Not a good sign. Beginning to look like that 4GB stick took a permanent vacation on you. |
Posted By: Xaltar
Date Posted: 09 Nov 2016 at 6:09pm
|
I have to agree with Wardog here I'm afraid, it sounds like the module is dead or faulty. -------------
|
Posted By: duall
Date Posted: 09 Nov 2016 at 8:54pm
| The modules are correct, I have an old board asus P5VD2 X, and I take the modules one at a time with no problem, I just lower the MHZ because it does not support |
Posted By: Xaltar
Date Posted: 09 Nov 2016 at 9:31pm
|
" rel="nofollow - Did you try the 4gb module in all your RAM slots? This is very odd behavior given the RAM you have is even on ASRock's QvL for your board. If you have tried all the slots then try putting the RAM in the slot furthest from the CPU then clear CMOS before powering on again. -------------
|
Posted By: duall
Date Posted: 09 Nov 2016 at 9:56pm
| I just tried it, does not even sound the piiiiii, just turns on fans, black screen, as always |