The specs for extreme4
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=3838
Printed Date: 15 Dec 2024 at 6:52am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: The specs for extreme4
Posted By: movn
Subject: The specs for extreme4
Date Posted: 18 Nov 2016 at 8:01pm
|
" rel="nofollow - The site i'm buying from says 3200(OC) is looks like they copied from the manual. The sites specs say 3600(OC) http://www.asrock.com/mb/Intel/Z170%20Extreme4/?cat=Specifications The manual says 3200(OC) http://asrock.pc.cdn.bitgravity.com/Manual/Z170%20Extreme4.pdf Which is it? If i have 3600 ram i can't overclock it any higher than 3600 right? i could lower the cas timings tho? Ram normally doesn't matter but for overwatch low settings pushing to 300 stable fps it does, the CPU and GPU are sub 100% utilized, the ram becomes the bottleneck.
|
Replies:
Posted By: parsec
Date Posted: 19 Nov 2016 at 12:28am
I assume your question is what is the DDR4 memory over clock limit for the Z170 Extreme4 board? Don't forget that any memory speed above the Intel specification for Skylake processors, which is 2133, is an over clock of the memory. Between the time Z170 boards were released, and now, over one year, the maximum memory OC speeds has evolved with new models of memory. My suggestion to you is to check the Memory Support List for this board. Sorry for the text link, the forum link tool has problems with some URLs: http://www.asrock.com/mb/Intel/Z170%20Extreme4/?cat=Memory NOTE: It is very important that you carefully study the model number, speed of the memory, and capacity/amount of memory you are considering using. In general, as the memory OC speed increases, there are more restrictions on the amount of memory that can be used. At very high memory over clocks, you can only use one or two DIMMs maximum. That also depends upon the model of memory. If the memory model you want to use is not included in the Memory Support List, it is essential that you verify compatibility of that memory and your board, with the memory manufacture. ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|
movn wrote:Posted By: movn
Date Posted: 19 Nov 2016 at 1:14am
|
The lists look old, there's barely any 16gb and zero 32gb. It seems all the asrock boards have the same list. The ram i want to use is. G-Skill-Trident-Z-2x8GB-DDR4-3200-CL15-F4-3200C15D-16GTZ http://gskill.com/en/product/f4-3200c15d-16gtzsk http://www.overclockers.com/forums/showthread.php/775007-G-Skill-Trident-Z-2x8GB-DDR4-3200-CL15-F4-3200C15D-16GTZ" rel="nofollow - http://www.overclockers.com/forums/showthread.php/775007-G-Skill-Trident-Z-2x8GB-DDR4-3200-CL15-F4-3200C15D-16GTZ He said it's working without issues on asrock z170 boards. So if the board says 3200 or 3600(which is it) that's the maximum it can go? No bios updates can get it higher? |
Posted By: wardog
Date Posted: 19 Nov 2016 at 4:27am
|
Woomack is a very respected Member there at Overclockers. If he says they work, then they do. Look at his Rep under his name to the left of his post! |
Posted By: parsec
Date Posted: 19 Nov 2016 at 11:31am
You last question is a simple question about a highly complex situation. Since I am not a mother board engineer, electrical engineer, nor a PC memory design engineer, and don't know what memory chip manufactures will create in the future, I cannot begin to answer that question. This is G.SKILLs QVL listing for the memory you listed, G.SKILL F4-3200C15D-16GTZ:  http://gskill.com/en/product/f4-3200c15d-16gtz" rel="nofollow - http://gskill.com/en/product/f4-3200c15d-16gtz Above we see eight Z170 mother boards that G.SKILL has validated for use with the F4-3200C15D-16GTZ memory. Note that one major mother board manufacture's Z170 products are completely missing, as well as a couple less well known brands. Of course, G.SKILL's list may not be completely inclusive, but you'd need to ask them about that. ASRock has 24 different Z170 board models. Did G.SKILL test them all? There's a lesson to be learned from G.SKILL's QVL list. All mother boards are not created equal. If you believe or expect a $100 Z170 board will be identical to a $300 Z170 board regarding memory over clocking potential, then I wish you luck! Don't forget the Skylake memory controller is part of the CPU, not on the board. Are you familiar with the term, Silicon Lottery? G.SKILL has 430 models of DDR4 memory. Does anyone test them all? There are 15 DDR4 16GB DIMM memory models included in the Z170 Extreme4's Memory Support List. Some of those kits are 32GB and 64GB. I could explain again about the relationship between memory capacity and over clocking potential, but you ignored it, so why bother again? The Z170 Extreme4's Memory Support List includes the very similar F4-3200C16D-16GTZ model. ------------- http://valid.x86.fr/48rujh" rel="nofollow">
|
Posted By: LutaWicasa
Date Posted: 20 Nov 2016 at 3:06am
|
No mobo manufacturer would be able to test out every brand and/or iteration of ram. The reverse is also true. During the years I have been building and ocing comps, I have run across very few instances of ram/mobo incompatibility. Note that was very few, not non-existent. You do your best to research pre-purchase, but.....unless you want to stick strictly to QVL lists there is a certain amount of "chance" involved  *EDIT* And, yes indeed....Woomack is a highly respected member at OCF  ------------- I7 6700K Z170 Extreme6 2x8 GSkill Rip Jaw 3200 Samsung 512 950Pro NVME EVGA 1070 FTW |