USB to Ethernet Adapter breaks on A520M-itx/ac
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=38467
Printed Date: 16 Jun 2024 at 10:44am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: USB to Ethernet Adapter breaks on A520M-itx/ac
Posted By: crayio
Subject: USB to Ethernet Adapter breaks on A520M-itx/ac
Date Posted: 12 May 2024 at 4:52pm
|
I recently built a new computer with the A520M/itx-ac board and a 5600g. It also has an intel arc 380. I am trying to use a 2.5Gbps ethernet adapter, but if I let it autonegotiate its speed (to 2.5Gbps) then no traffic passes through and it continually resets. I have 3 of these adapters and it happens to all three. All three work in my other devices. If I set the interface to 1Gbps, it works fine. Any ideas what this could be? Power delivery issue? USB incompatibility? I've tried every usb port, both C and A, and they all fail in this manner. |
Replies:
Posted By: Xaltar
Date Posted: 12 May 2024 at 5:52pm
|
I would open a ticket with ASRock Tech Support and include a link to your thread here. https://tw.asrock.com/events/tsd.asp" rel="nofollow - https://tw.asrock.com/events/tsd.asp I am assuming you are using a USB ethernet adapter? If you could include the model/s of your devices that should help ASRock's support staff to track down the issue. ------------- 
|