Wake on LAN, X670E Steel Legend
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=38569
Printed Date: 20 Jun 2024 at 11:18pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Wake on LAN, X670E Steel Legend
Posted By: bentwarp
Subject: Wake on LAN, X670E Steel Legend
Date Posted: 13 May 2024 at 12:35pm
I am having issues enabling WOL on my motherboard on Linux.
- BIOS 2.10
- I am using Gigabit LAN 10/100/1000 Mb/s (Realtek RTL8111)
- I have enabled PCI Devices Power
- I have disabled Deep Sleep
- I have enabled wol and magic packet on my network interface
> sudo ethtool enp7s0
Settings for enp7s0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: on
master-slave cfg: preferred slave
master-slave status: slave
Port: Twisted Pair
PHYAD: 0
Transceiver: external
MDI-X: Unknown
Supports Wake-on: pumbg
Wake-on: g
Link detected: yes
|
- I have tried multiple tools to try to send MagicPacket (g) to mac address but nothing happens
- After sleep/suspend, the network link connection LED on ethernet port is NOT blinking
Can someone maybe help me out, I dont know what else I could do.
|
Replies:
Posted By: M440
Date Posted: 14 May 2024 at 12:57am
You might need to set something specific for your network card.
For the RTL8125 network card i had to install one package. There is something about RTL8111 too. (5.4 Realtek section)
https://wiki.archlinux.org/title/Wake-on-LAN#Realtek" rel="nofollow - https://wiki.archlinux.org/title/Wake-on-LAN#Realtek
-------------
asrock b650m/hdv.m2, ryzen 7700x@85watt
|
Posted By: M440
Date Posted: 14 May 2024 at 10:32pm
the LED is always off in sleep/suspend for RTL8125
also: https://wiki.archlinux.org/title/Network_configuration/Ethernet#Realtek_no_link_/_WOL_problem" rel="nofollow - https://wiki.archlinux.org/title/Network_configuration/Ethernet#Realtek_no_link_/_WOL_problem
So basically you might want to blacklist module r8169 and load r8168. You might want to set an option for the module.
> cat /etc/modprobe.d/blacklist_r8169.conf
blacklist r8169
#option r8168 s5wol=1
> cat /etc/modules-load.d/r8168.conf
r8168
|
-------------
asrock b650m/hdv.m2, ryzen 7700x@85watt
|
Posted By: bentwarp
Date Posted: 15 May 2024 at 4:33pm
|
M440, thank you very much for your help. Will try it today and report back.
|
|