A88M-ITX/ac - Wifi Module mounting
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=4007
Printed Date: 18 Oct 2024 at 8:20pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: A88M-ITX/ac - Wifi Module mounting
Posted By: GE33
Subject: A88M-ITX/ac - Wifi Module mounting
Date Posted: 12 Dec 2016 at 5:20pm
|
Hi! I have a problem to connecting the antennas of the WiFi module on this motherboard. The diagram (in manual) does not correspond with the type of module on this FM2+ motherboard. It is therefore not indicated; How to "connect" the antennas to the module.  Can you help me please ??
|
Replies:
Posted By: wardog
Date Posted: 12 Dec 2016 at 5:30pm
|
In the pic above, adjacent to the 8-pin CPU Power, there are two small antenna connection "points' on the card itself. These are where the two antenna cables connect to the WiFi/BT card. |
Posted By: GE33
Date Posted: 12 Dec 2016 at 5:38pm
A, B, or C ? The sockets are so small that I do not know how to connect the wires to the wifi module ...
|
Posted By: wardog
Date Posted: 12 Dec 2016 at 7:26pm
|
https://en.wikipedia.org/wiki/SMA_connector" rel="nofollow - https://en.wikipedia.org/wiki/SMA_connector And yes, they're mighty small. Do what I do and remove the card from the board and connect the two outside the case where it isn't so cramped they're hard to view and fiddle with. Where you have more room and better lighting. |
Posted By: Xaltar
Date Posted: 12 Dec 2016 at 7:47pm
This is the correct way to do it (at least IMO), attaching them while the card is installed puts unnecessary stress on the slot and card that can cause damage to either. ------------- 
|
wardog wrote: