Asrock 970M Pro3 - Splitter/2 Fans from Board 3 Pi
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=4072
Printed Date: 18 Nov 2024 at 2:24pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Asrock 970M Pro3 - Splitter/2 Fans from Board 3 Pi
Posted By: Paul_MCFC
Subject: Asrock 970M Pro3 - Splitter/2 Fans from Board 3 Pi
Date Posted: 21 Dec 2016 at 12:14am
|
" rel="nofollow - Is it OK to use a splitter and run two fans from either the 3 pin or 4 pin on this board? Or is a better solution to get an adaptor and plug into psu molex? Thanks
|
Replies:
Posted By: wardog
Date Posted: 21 Dec 2016 at 1:52am
  This is by far the best idea. Eliminates demanding too much power from the fan header when two are powered from it. Here's where I get all my fan cables from: sidewindercomputers.com |
Paul_MCFC wrote:Posted By: Paul_MCFC
Date Posted: 21 Dec 2016 at 6:17am
Thanks !!! 
|