Print Page | Close Window

XMP on Z170M Pro4

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=4130
Printed Date: 21 May 2024 at 6:20am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: XMP on Z170M Pro4
Posted By: AhmadNaim93
Subject: XMP on Z170M Pro4
Date Posted: 30 Dec 2016 at 11:00pm
" rel="nofollow - Hi, is there any differences between enabling xmp on easy mode and advance mode? Previously I enabled xmp on advance and suffer constant bsod during gaming. Then decided to run memtest86 between xmp on and off. When xmp enabled there are error, when disabled no error. Next I tried to enable xmp on easy mode, no error on memtest, no bsod during gaming and heavy usage. Is there any extra steps when enabling xmp advance mode. The ram i'm using is avexir blitz 3000mhz 2x4gb kit (AVD4UZ132001604G-2BZ1SW).



Replies:
Posted By: wardog
Date Posted: 31 Dec 2016 at 1:50am
" rel="nofollow - This sounds more memory related than BIOS. Contact Avexir to verify.

Too, do you know how to bypass using XMP and manually enter/set the Primary timings, voltage, and Command Rate? This would be highly advisable in diagnosing.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net