Print Page | Close Window

asrock fatal1ty x99x killer bios

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=4214
Printed Date: 19 Jul 2025 at 10:56am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: asrock fatal1ty x99x killer bios
Posted By: Wax
Subject: asrock fatal1ty x99x killer bios
Date Posted: 10 Jan 2017 at 7:13pm
Hello a have this motherboard
I have a problem starting my 6800k. My memory DDR4 2666MHz CL15 Kingston HyperX Fury Black Series 4X4. After launching an error code "bd" the problem is that it does not load the BIOS. He found that akutualizace bios should help But I do not know if you can do it outside bios

Thank for any help and idea



Replies:
Posted By: parsec
Date Posted: 10 Jan 2017 at 10:07pm
" rel="nofollow -
Originally posted by Wax Wax wrote:

Hello a have this motherboard
I have a problem starting my 6800k. My memory DDR4 2666MHz CL15 Kingston HyperX Fury Black Series 4X4. After launching an error code "bd" the problem is that it does not load the BIOS. He found that akutualizace bios should help But I do not know if you can do it outside bios

Thank for any help and idea


We need the full model number of your memory to check for compatibility.

Do you know which UEFI/BIOS version you have in your board? The BIOS chips have a sticker on them, they are close to the board's battery, on the right side of the battery. You must have at least BIOS version 3.00 to work with a Broadwell-E i7-6800K.

Your memory must be in the A1, B1, C1, and D1 slots, when using four DIMMs.

You can try clearing the BIOS/CMOS. Is this the first time you are starting your board?




-------------
http://valid.x86.fr/48rujh" rel="nofollow">


Posted By: Wax
Date Posted: 11 Jan 2017 at 12:29am
" rel="nofollow - thank you for fast feedback
this is my first start board
my memory are: hx426c15fbk4 / 16 are already installed A1, B1, C1, D1 (also tried only one module)
I tried resetting the CMOS and clean for several times bios A and B.
And my bios: P2.10
bios B is the same
I can buy another chip or update without having to enter the bios?


Posted By: Xaltar
Date Posted: 11 Jan 2017 at 2:57am
Contact ASRock Tech support here:

http://event.asrock.com/tsd.asp" rel="nofollow - http://event.asrock.com/tsd.asp

Make sure to detail your issue. This is a common issue and they are always very helpful with it.


-------------



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net