ROMED8-2T doesn't boot anymore
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=42409
Printed Date: 17 Sep 2024 at 4:17am Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: ROMED8-2T doesn't boot anymore
Posted By: Charting5637
Subject: ROMED8-2T doesn't boot anymore
Date Posted: 10 Jun 2024 at 7:03am
Hi,
I own a ROMED8-2T motherboard and since a recent reboot of the machine, it won't boot nor show any video signal on an external monitor. The IPMI ethernet port flashes but doesn't get a DHCP address. The BIOS screen shows b2 code.
Here's what I did to troubleshoot the problem : 1. Stripped down the computer to the basic (CPU + RAM only, nothing else) 2. Alternated the position of the RAM 3. Reinstalled the CPU in case there was an alignment problem 4. Tested with only one RAM stick
Still got b2 code. Then : 1. Temporarly bringed back everything together 2. Removed CMOS battery + shorted CMOS 3. Started back on the computer
Now, the BIOS screen shows a 90 sec countdown and end up with a b2 code. Here's a video of the BIOS screen in case it shows useful informations : https://we.tl/t-oQ0BDmrziS" rel="nofollow - https://we.tl/t-oQ0BDmrziS
Finally, here's the whole setup :
Motherboard Model Name : ROMED8-2T CPU/Processor (Brand,Speed, FSB,Cache Size) AMD Epyc 7302P, 3.0GHz, 128 MB Memory (Speed, Capacity, Brand) DDR4 3200 (PC4 25600), ECC Registered, 64 GB, Micron Video Card (Brand, Model, Memory size) MSI, Radeon RX Vega 56 xAir Boost, 8G Operating System (Loaded service pack and driver) TrueNAS Scale v23 Hard Drive (Brand, Model, Capacity) Seagate IronWolf, ST16000NTA0, 16TB Other Device (Brand, Model) 2x NMVe SAMSUNG 980 PRO SSD 500GB 2x NVMe SAMSUNG 980 PRO SSD 1TB on 2x NVMe to PCIe 4.0 X4 Adapter Gigabit Ethernet (Intel I210-T1)
With these infos and your valued knowledge, is there anything that can be done to fix this issue?
Thanks in advance and regards!
|
Replies:
Posted By: Charting5637
Date Posted: 10 Jun 2024 at 9:00pm
Charting5637 wrote:
Hi,
I own a ROMED8-2T motherboard and since a recent reboot of the machine, it won't boot nor show any video signal on an external monitor. The IPMI ethernet port flashes but doesn't get a DHCP address. The BIOS screen shows b2 code.
Here's what I did to troubleshoot the problem : 1. Stripped down the computer to the basic (CPU + RAM only, nothing else) 2. Alternated the position of the RAM 3. Reinstalled the CPU in case there was an alignment problem 4. Tested with only one RAM stick
Still got b2 code. Then : 1. Temporarly bringed back everything together 2. Removed CMOS battery + shorted CMOS 3. Started back on the computer
Now, the BIOS screen shows a 90 sec countdown and end up with a b2 code. Here's a video of the BIOS screen in case it shows useful informations : https://we.tl/t-oQ0BDmrziS" rel="nofollow - https://we.tl/t-oQ0BDmrziS
Finally, here's the whole setup :
Motherboard Model Name : ROMED8-2T CPU/Processor (Brand,Speed, FSB,Cache Size) AMD Epyc 7302P, 3.0GHz, 128 MB Memory (Speed, Capacity, Brand) DDR4 3200 (PC4 25600), ECC Registered, 64 GB, Micron Video Card (Brand, Model, Memory size) MSI, Radeon RX Vega 56 xAir Boost, 8G Operating System (Loaded service pack and driver) TrueNAS Scale v23 Hard Drive (Brand, Model, Capacity) Seagate IronWolf, ST16000NTA0, 16TB Other Device (Brand, Model) 2x NMVe SAMSUNG 980 PRO SSD 500GB 2x NVMe SAMSUNG 980 PRO SSD 1TB on 2x NVMe to PCIe 4.0 X4 Adapter Gigabit Ethernet (Intel I210-T1)
With these infos and your valued knowledge, is there anything that can be done to fix this issue?
Thanks in advance and regards! |
The PSU is a SeaSonic PRIME 1300W 80+ Gold, 5 months old, purchased new
|
Posted By: Xaltar
Date Posted: 10 Jun 2024 at 10:27pm
This may be of help: https://forum.asrock.com/forum_posts.asp?TID=11132" rel="nofollow - https://forum.asrock.com/forum_posts.asp?TID=11132
-------------
|
|