Print Page | Close Window

Z170M PRO4S No Post

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=4325
Printed Date: 22 Jul 2025 at 7:46pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Z170M PRO4S No Post
Posted By: eduprevil
Subject: Z170M PRO4S No Post
Date Posted: 30 Jan 2017 at 9:53am
I just put all the part together and everything runs when the system is powered on but there is no display on the monitor. Any help would be appreciated. 

Specs:
Cpu: Intel i5-7600
cooler: coolermaster 612 ver 2
RAM: Corsair vengeance LPX 8GB (2x4) DDR4 3GHz
PSU: EVGA Super NovaG1 650W




Replies:
Posted By: parsec
Date Posted: 30 Jan 2017 at 10:36am
" rel="nofollow -
Originally posted by eduprevil eduprevil wrote:

I just put all the part together and everything runs when the system is powered on but there is no display on the monitor. Any help would be appreciated. 

Specs:
Cpu: Intel i5-7600
cooler: coolermaster 612 ver 2
RAM: Corsair vengeance LPX 8GB (2x4) DDR4 3GHz
PSU: EVGA Super NovaG1 650W



You have a Z170M Pro4S board, Skylake chipset, and use a Kaby Lake i5-7600 CPU, correct?

What BIOS version does the board have? The BIOS chip is in the lower right corner of the board, below the group of four SATA ports. Their should be a sticker on the chip with the BIOS version number on it.

Any and ALL Skylake chipset boards MUST have a Kaby Lake compatible BIOS version installed. Those BIOS versions all are of the format 7.xx. You need your board's version 7.10 BIOS installed, or the CPU will not start. There is no way to flash the BIOS since your CPU will not start.

That is a standard limitation of Intel cross generation processor/chipset compatibility. This applies to ALL mother board manufactures. Intel has not been able to supply a workaround for this situation.

Only two ways to fix this:

Install a Skylake processor in the board, flash to the 7.10 BIOS, and replace the CPU with your Kaby Lake model.

Get a replacement BIOS chip from ASRock, with the correct BIOS version on it. The chip can be replaced by the user, they are in a socket, no soldering required. You can request a new BIOS chip from ASRock by submitting a request on the page below. You should not be charged for the new chip in this situation:

http://www.asrock.com/support/index.asp?cat=RMA


-------------
http://valid.x86.fr/48rujh" rel="nofollow">



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net