Help - Priority Boot on J4205_ITX
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=4352
Printed Date: 18 Oct 2024 at 3:43pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Help - Priority Boot on J4205_ITX
Posted By: BertMart
Subject: Help - Priority Boot on J4205_ITX
Date Posted: 04 Feb 2017 at 7:39am
|
I think I have a problem with an Asrock J4205-ITX board, when I connect SATA disks appear in the list of SATA devices, but in the boot priorities do not appear. Only the USB stick can be seen when I connect them. The disks worked correctly on the previous board, an Asrock J1900-ITX. |
Replies:
Posted By: parsec
Date Posted: 04 Feb 2017 at 10:16am
" rel="nofollow -
Do you have the SATA drives connected to the Intel SATA ports, or the ASMedia SATA ports? Do you have the CSM option set to Disabled? Or Secure Boot set to Enabled? Are you using the Hard Drive BBS Priorities screen? Did you try clearing the BIOS/CMOS? ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|
BertMart wrote:Posted By: wardog
Date Posted: 04 Feb 2017 at 10:23am
|
" rel="nofollow - Advanced > Storage Configuration - SATA Controller(s), set to "Enabled" Advanced > Storage Configuration - SATA Mode Selection, set to "AHCI" Advanced > Storage Configuration - ASMedia SATA3 Mode, set to "AHCI" Do all your internal disks display in the Advanced > Storage Configuration screen? Or are you referring to external drives connected via USB? |
Posted By: BertMart
Date Posted: 05 Feb 2017 at 1:13am
Thank you |
Posted By: cannca
Date Posted: 14 Aug 2018 at 6:32pm
|
" rel="nofollow -
Hi, I have the same problem on a j4105 motherboard. How did you activate the csm mode?
|