Bios update after 1 week BSOD
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=43582
Printed Date: 28 Sep 2024 at 12:52pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Bios update after 1 week BSOD
Posted By: Tron
Subject: Bios update after 1 week BSOD
Date Posted: 13 Jun 2024 at 3:33am
|
Hello. I updated my bios to gain the logo security and everything worked perfectly for almost a week. Then I suddenly got BSOD crash. My computer restarted and with in 15 seconds of signing back in it would crash again. And now it will only allow me to go into the bios settings and when I launch windows it gives me the repair options and will not boot. -I have since tried many different bios versions with no luck and just switched back to the newest 3.01. -I have removed all the hardware, inspected and reinstalled. New thermal paste on the cpu, tried single ram stick and switched them out in the correct B2 slot, tried removing my gpu and using on board igpu only. -I have installed Bootable windows 11 on a USB and tried to boot from it and still no luck. -I have removed my m.2 drive and hooked up a blank Hdd and tried to install windows and it crashes while installing. -I have tried disabling the igpu and only run the 7900xtx, -I Cleared the CMOS many times. -Disconnected the aux usb plug and aux HD audio plug As you can see I think I am running out of options. When I try to boot to windows I get windows stop codes: -critical_process_died -memory_management -pfn_list_corrupt -attempted_write_to_readonly_memory And now I have been getting: recovery page your pc/device needs to be repaired error code 00xc000000e |
Replies:
Posted By: Tron
Date Posted: 13 Jun 2024 at 3:40am
|
Specs are: Asrock x670e steel legend r7 7700x Rx7900xtx 2 sticks of 16gb trident z5 g.skill 6000 ram Corsair Rmx1000watt psu Msi 240 aio liquid cooler Samsung 980 pro 2tb m.2 I've been running this set up since November 2022 with no issues until now. |
Posted By: M440
Date Posted: 13 Jun 2024 at 7:30am
|
you cant enter bios? maybe try reflash the bios using usb-flashback, if you cleared cmos ------------- asrock b650m/hdv.m2, ryzen 7700x@85watt |
Posted By: Tron
Date Posted: 13 Jun 2024 at 8:20am
| Yes I have done this many times I tried a bunch of different versions with no luck |
Posted By: mrbill
Date Posted: 13 Jun 2024 at 10:22am
|
Try FW 1.30 as05. That?™s the newest FW that will work for me. ASRock basically ignored my support request for help in fixing their FW and left me vulnerable with this old FW. I have the same MB as you, and it will be the last ASRock product I purchase. ------------- ASRock X670E Steel Legend (ABA159EAF581) AMD Ryzen 9 7900X 32GB (2x16GB) G.Skill F5-5200J4040A16GX2-RS5K WD SN570 2TB MSI NVIDIA GeForce RTX 3080 Ti Win 11 Pro |
Posted By: Tron
Date Posted: 13 Jun 2024 at 12:16pm
| Thank you I will give it a try again. I believe I tried it already as I think I have seen your other post talking about this. To be sure I will give it a go again. |
Posted By: M440
Date Posted: 13 Jun 2024 at 3:21pm
yes, you can try FW 1.30 as05, as mentioned by mrbill. It is a version with different default memory training options. if trying with minimal components wont help either imo u should contact asrock for rma ------------- asrock b650m/hdv.m2, ryzen 7700x@85watt |
mrbill wrote:Posted By: Tron
Date Posted: 13 Jun 2024 at 3:29pm
| Okay thank you I will give this a try and I have submitted a ticket with asrock today as well. |
Posted By: K9PT
Date Posted: 15 Jun 2024 at 7:03pm
| Try put the DDR Train Memory Enable |
Posted By: Tron
Date Posted: 16 Jun 2024 at 12:09am
| Thanks I will try this. A friend of mine told me he had similar issue and one of his ram pins was bent so I am going to check this as well. |
Posted By: Tron
Date Posted: 17 Jun 2024 at 1:33am
|
SOLVED! MY M.2/nvme samsung 980 pro 2tb DRIVE is faulty. I removed it and temp installed windows on a separate drive and it works perfect. Just having the M.2 in it's slot was causing everything to fail. |
Posted By: M440
Date Posted: 21 Jun 2024 at 3:01am
|
yes, i rememeber when SSD was failing on my for the first time - i was pretty sure it was motherboard or memory and wouldent think its SSD, because i thought it should be more reliable than HDD... yeah, right.. BTW you might try to make an image from your SSD drive and use it in virtual machine. When the writes fail the OS stops being bootable from the drive, but reads might still work (if accessed purely for reads from OS booted from other drive). ------------- asrock b650m/hdv.m2, ryzen 7700x@85watt |
Posted By: Leila
Date Posted: 09 Jul 2024 at 1:06pm
|
I am happy to hear you solved the problem. Bad drives can cause a lot of headaches. You should absolutely consider getting your 980 Pro replaced if it is still under warranty. ------------- DEVLOPER |