G10 Port Forwarding problem
Printed From: ASRock.com
Category: Media&User's Review
Forum Name: Networking Products
Forum Description: ASRock Networking Products
URL: https://forum.asrock.com/forum_posts.asp?TID=4518
Printed Date: 24 Nov 2024 at 12:15pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: G10 Port Forwarding problem
Posted By: Haginator
Subject: G10 Port Forwarding problem
Date Posted: 02 Mar 2017 at 4:51am
|
Hello Trying to Port forward to my NAS but for the life of me I can't get it to work. These are my settings. 192.168.1.2 is set to manual DHCP. (MAC tied to IP)  I can reach my site with the local adress 192.168.1.2:2708 but it will not work using my public IP. (ERR_CONNECTION_REFUSED) Omitting the port and just entering my public IP loads the router page as expected. What am I doing wrong? (Loaded the latest firmware in beta, did nothing) Regards, H |
Replies:
Posted By: wardog
Date Posted: 02 Mar 2017 at 7:03am
|
Natch that. If I read a little closer ............ IIRC, you need a Dynamic DNS Provider to do it locally. ie: haginator.no-ip.net Have a friend try <public ip>:2708 This should work outside your internal network coming In Also, turn off/disable the routers Remote Management page in the routers GUI and you may, may, get get to the NAS box locally. Post back your results please. |
Posted By: Haginator
Date Posted: 02 Mar 2017 at 10:22pm
|
I do have an dyndns account and have it setup in DDNS on the G10 I turned of, I think, remote control but that didn't do much either way. I'll try offsite surfing to the NAS later today. |
Posted By: wardog
Date Posted: 03 Mar 2017 at 3:03am
|
If you'd like some out of local network aid, PM me the details If you still get the login screen of the router, you haven't disabled the routers Remote Management. That's a good sign though that you have everything else set right as it is in fact directing you to the router log in. Disable the Remote Management option/feature and it should be good |