Automatic downclocking in the new BIOSes
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=4732
Printed Date: 17 Nov 2024 at 6:24am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Automatic downclocking in the new BIOSes
Posted By: ming3r
Subject: Automatic downclocking in the new BIOSes
Date Posted: 31 Mar 2017 at 8:32am
|
" rel="nofollow - Hi, I just went to the newest 1.93D on the AM4 X370 Killer SLI AC and everything seems to be working nicely except for one thing: My system seems to no longer downclock. Is anyone else running into that with the beta bioses? It seemed to work fine on the previous 1.63 and I tried going between balanced and power saving power schemes.
|
Replies:
Posted By: ming3r
Date Posted: 31 Mar 2017 at 11:13pm
|
Looked into it a bit more on the 2.0 BIOS which has the same behavior, but I really hope this isn't what is expected to happen: In this you can now choose your clock and voltage by typing it in up top of the OC section, but it locks you to that speed and doesn't allow for downclocking. I had to set a P0 state for my max OC at 3.8 then left everything else at auto so it would still downclock. |
Posted By: qwased
Date Posted: 01 Apr 2017 at 3:42am
| I set it as you said but cpu clock was locked under 2.7Ghz. No idea about this |
Posted By: ming3r
Date Posted: 01 Apr 2017 at 3:49am
|
" rel="nofollow - With P0 state or just the main OC section? When I did it in main section with 1.93 and 2.0 it was locked at 3.8. If I left it on Auto it worked fine. |
Posted By: qwased
Date Posted: 01 Apr 2017 at 3:58am
If I adjust pstate section it would be locked to 2.7ghz With bios 1.93 and 2.0 when you set the OC clock , pstate will set to 3.8ghz.But with bios 1.7,all pstate section always be auto I think this is the reason of the problem.Hope Asrock can fix it in the next patch
|
ming3r wrote:Posted By: ming3r
Date Posted: 01 Apr 2017 at 7:18am
|
Ugh...yup, you're right. Mine is doing the same thing here.
Actually, I just got it working. I used the built in OC, then went to P states where it set both the first and second states to 3.8. I set the second to 2.7 (the default after switching it to auto then back to manual) and it seems to be working now  |
Posted By: Trender
Date Posted: 01 Apr 2017 at 8:47am
EDIT: Now im stuck n the lowest GHz speed lol
|
Posted By: ming3r
Date Posted: 01 Apr 2017 at 10:22am
| Not sure what to tell you on that. I used the default when I switched out of Auto on the second state and its been OK...so I'm not sure |