ASRock B650M-HDV/M.2 LEDs cycling but won't POST
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=48897
Printed Date: 20 Apr 2025 at 8:22pm Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: ASRock B650M-HDV/M.2 LEDs cycling but won't POST
Posted By: wzl_
Subject: ASRock B650M-HDV/M.2 LEDs cycling but won't POST
Date Posted: 07 Jul 2024 at 5:38am
CPU: AMD Ryzen 7 7800X3D 4.2 GHz 8-Core Processor CPU Cooler: Thermalright Phantom Spirit EVO 69 CFM CPU Cooler Motherboard: ASRock B650M-HDV/M.2 Micro ATX AM5 Motherboard Memory: Patriot Viper Venom 32 GB (2 x 16 GB) DDR5-6400 CL32 Memory Storage: Western Digital Black SN850X 1 TB M.2-2280 PCIe 4.0 X4 NVME Solid State Video Card: Gigabyte WINDFORCE OC GeForce RTX 4060 8 GB Video Card Power Supply: ADATA XPG Core Reactor II 850 W 80+ Gold Certified Fully Modular ATX Power Supply
The motherboard LEDs are cycling between DRAM+CPU to Boot+VGA, then all 4 light up and the cycle repeats until I shut it down. Things I've tried include: - Booting outside of the case on a non-conductive surface - RMA'd mobo (issue persists with replacement) - Reseated everything multiple times - Different PSU with new cables - Different GPU - RAM in every slot configuration, together and separately - Cleared CMOS - Flashed BIOS - HDMI instead of DP
A friend of mine has an almost identical build and everything is working normally for him. At this point I assume it must be the CPU, but I'm desperate for any other tips you all may have. Thanks!
|
Replies:
Posted By: wzl_
Date Posted: 07 Jul 2024 at 7:33am
Update: I've tried a new CPU and the problem persists.
|
Posted By: CPC_Eric
Date Posted: 23 Jul 2024 at 9:33pm
Same issue with the LED's flashing. Although i CAN get into bios, if i use iGP only. When inserting dedicated graphics and connecting them, i get LED flash.
CPU: AMD Ryzen 7 7600X CPU Cooler: Gelit Silent Motherboard: ASRock B650M-HDV/M.2 Memory: 2x 16GB G.Skill FlareX5 6000 CL36 Storage: Lexar 2TB NVME Video Card: PowerColor RX7700XT Power Supply: Thermaltake Toughpower GF1 850W
I tried above graphics cards, but also an old Asus nvidia passive cooled. Connecting screen via HDMI. I can see it detects output, but before it can give vision, the MoBo cycles.
When only using iGP, it works fine, can enter BIOS, can edit settings, can select XMP. Also when setting graphics to prefer iGP, but connecting HDMI to dedicated, will not POST
|
Posted By: CPC_Eric
Date Posted: 23 Jul 2024 at 9:36pm
Forgot to mention BIOS update to 3.01 Also tried clearing CMOS after update.
|
|