a970 g3.1 problem
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=5010
Printed Date: 22 Dec 2024 at 9:33pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: a970 g3.1 problem
Posted By: sagi
Subject: a970 g3.1 problem
Date Posted: 30 Apr 2017 at 8:26am
|
" rel="nofollow - hello everybody just made a new build with this mobo and fx8350 other parts are 2x8gb hyper x 1866 modules and asus r7 250x graphic card my psu is bequiet 400 watt and 2 ssd drives i run the system and all i get is power at the fans and nothing else .. hhd led reset button all work ok but the system is not booting.. Tried cmos reset , battery removal, all power plug combinations (atx 20 pin > 24 pin) ( atx12v 4 pin > 8pin) i have no usb power on and also no power on anything at the back panel any ideas?? thanks in advance
|
Replies:
Posted By: wardog
Date Posted: 30 Apr 2017 at 10:54am
|
" rel="nofollow - Check that the memory is compatible? |
Posted By: sagi
Date Posted: 01 May 2017 at 6:42pm
|
well, i saw another thread here about ram on this board and a moderator said that the qvl is old and an 8 gb stick will work fine , but according to the present QVL then, no my ram is not supported But honestly this QVL shows a a couple of dozen supported ram of 1 and 2 gigs which is not very 2017
 |
Posted By: wardog
Date Posted: 01 May 2017 at 7:05pm
The 970 chipset is odd in some different ways. What is the PN of the ram you have? |
sagi wrote:Posted By: sagi
Date Posted: 01 May 2017 at 9:25pm
|
thanks a lot for reply...after some more searching i foun that ram work only at red rails ..finally the pc booted but i see that on a userbenchmark are clocked at 933mhz.. is there any set up i can try on oc panel for this thanks again for your reply
|
Posted By: Xaltar
Date Posted: 01 May 2017 at 9:47pm
|
DDR = Double Data Rate so: 933 x 2 = 1866  Your RAM is working perfectly. ------------- 
|
Posted By: sagi
Date Posted: 02 May 2017 at 6:32am
thanks a lot friend.. 
|