X99 Taich Quad Channel Problems
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=5048
Printed Date: 25 Jul 2025 at 11:13pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X99 Taich Quad Channel Problems
Posted By: CrovaX
Subject: X99 Taich Quad Channel Problems
Date Posted: 04 May 2017 at 8:09pm
|
" rel="nofollow - Hey there at first my System: Intel i7 5820k 4x8gb Crucial Ballistics Sport 2400mhz Asrock X99 Taichi Radeon R9 390X Samsung EVO 840 Sata Crucial MX300 Sata Samsung SM961 NVMe Asus AC88 Now the question I have four modules of ram if i put them into slot a1 a2 b1 b2 they all will be recognised in dual channel mode full 32gb and working. if i put them into quad channel mode a1 b1 c1 d1 they will be recognised by the system browser in each channel also in the Dram tweaker, but it the main page is says 16 gb dual channel mode also in windows its only dual channel with 16gb. XMP2.0 Actived and deactivated both the same. my UEFI is 1.50 how do i get my modules working in quad channel mode with all 4 modules ?
|
Replies:
Posted By: wardog
Date Posted: 04 May 2017 at 8:34pm
|
ASRock has pulled BIOS 1.50. I would highly suggest using 1.40. ""I have four modules of ram" This doesn't sound like all 4 sticks came from a matched 32GB(4x8GB) Kit??? Kit PN? Reset to UEFI Defaults, Save and Exit, flash to 1.40. Once flashed and Saved once after flashing shut down and place the sticks securely/firmly into A1, B1, D1, and C1  |
Posted By: CrovaX
Date Posted: 04 May 2017 at 9:02pm
| " rel="nofollow - the modules are 2 16gb kits crucial ballistics sport ill try using 1.40 why did they pull out 1.50 ? |
Posted By: CrovaX
Date Posted: 04 May 2017 at 9:12pm
| Thanks it was the 1.50 now its working properly |
Posted By: wardog
Date Posted: 05 May 2017 at 3:49am
   |
CrovaX wrote: