X370 Killer SLI A/C tower power button connections
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=5143
Printed Date: 23 Dec 2024 at 2:20am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X370 Killer SLI A/C tower power button connections
Posted By: AlbinoRhino
Subject: X370 Killer SLI A/C tower power button connections
Date Posted: 15 May 2017 at 3:43am
|
In a couple of days I'll be able to put my build back together and I had a question which stumped me when I assembled everything the first time. I'm using the Phanteks Enthoo Evolv ATX tower and its front panel connections threw me for a loop. On the Mobo there are 9 pins for the tower buttons, HDD LEDs, Reset SW etc, but there are only 8 actual connectors to attach. Unless I'm off base here it looks like there is an extra ground pin on the Mobo which should be unneeded. Is this the correct setup to get the tower LEDs, power button, and the reset button to function? The reset button connection is what confused me since there are only 2 connectors , but 3 pins left. 
|