AMD Motherboards - Asrock B650 PRO RS expo problem

Print Page | Close Window

Asrock B650 PRO RS expo problem

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=52100
Printed Date: 27 Dec 2024 at 8:09am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Asrock B650 PRO RS expo problem

Posted By: Counxe
Subject: Asrock B650 PRO RS expo problem
Date Posted: 24 Jul 2024 at 10:51pm

Hello,

I assembled a system with the following components:

Asrock B650 PRO RS motherboard

Patriot Viper Venom (2x16GB) DDR5 6000MHz CL30 RAM

Ryzen 7 7800X3D CPU

POWERCOLOR HELLHOUND RX 7900 XT GPU

Upon receiving the system, I enabled the XMP profile for the RAM at 6200MHz CL32. Unfortunately, this caused damage to both the motherboard and CPU, rendering them unusable. Upon inspection, I found that the BIOS version at the time was 1.21. The store where I purchased these components replaced both the motherboard and CPU. Now, my BIOS version is 2.02. Should I attempt to enable the XMP profile again? I doubt they will replace the components again if something goes wrong.

And additionally there was no expo profile