z170 extreme + hyperx fury
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=5231
Printed Date: 29 Sep 2024 at 6:11am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: z170 extreme + hyperx fury
Posted By: Fabdelnor
Subject: z170 extreme + hyperx fury
Date Posted: 27 May 2017 at 10:51am
| " rel="nofollow - I have a mb z170 extreme6+ and a hyperx fury 2133 / 8gb memory, after install this memory the dr debug display, is showing the number `19`, i cleared cmos and nothing change. what should i do? |
Replies:
Posted By: wardog
Date Posted: 27 May 2017 at 12:17pm
|
" rel="nofollow - 19 relates to system RAM. Is this a build that has been running fine and then you swap in the HyperX to have 19 displayed? ps: I moved your post to the proper area. |
Posted By: parsec
Date Posted: 28 May 2017 at 10:38am
What is the full model number of your Kingston memory? Do you have one 8GB stick, or two 4GB sticks? Which memory slots on the board are you using? ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|
Fabdelnor wrote: