Print Page | Close Window

Ryzen 5600g on Fatal1ty AB350 Gaming-ITX/ac

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=52750
Printed Date: 05 Jan 2025 at 1:47pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Ryzen 5600g on Fatal1ty AB350 Gaming-ITX/ac
Posted By: tommyone
Subject: Ryzen 5600g on Fatal1ty AB350 Gaming-ITX/ac
Date Posted: 29 Jul 2024 at 10:45pm
Hello,

I have purchased a new 5600g processor for my Fatal1ty AB350 Gaming-ITX/ac motherboard, originally a 2400g was installed and everything ran without problems for many years. After the upgrade, the computer wouldn't boot until I found out it was only running with one memory installed.
Currently installed memory (2x8) is Corsair 16GB RAM KIT DDR4 3200MHz CL16 Vengeance RGB PRO (new) When the second memory is plugged in, the fan spins up but the BIOS does not boot. The board is loaded with the latest BIOS available on the website 10.08 [Beta]. I will be glad for any advice that will lead to a boot.

The base today is plugged into :
Ryzen 5600G
Corsair 16GB KIT DDR4 3200MHz CL16 Vengeance RGB PRO (new 2x8)
1xNVME 256GB
2x 128GB SATA RAID 0

Kind regards



Replies:
Posted By: wino
Date Posted: 30 Jul 2024 at 8:25pm
Reset BIOS with one stick of memory. Boot into Windows. Shut down the computer. Insert the second memory stick. Boot into Windows. Enter UEFI and configure memory and other settings.

Long live AB350 Gaming-ITX! ;)

-------------
AB350 Gaming-ITX/ac 10.31 BIOS | Ryzen 5 5600 | G.Skill Flare X 2x8GB @ 3466 14-14-14-28 | Zotac GTX 1050 Ti | Kingston KC3000 1 TB M.2 | SilentiumPC Supremo M2 Gold 550W V2 | Plywood case 24x22x21 cm


Posted By: tommyone
Date Posted: 14 Aug 2024 at 5:10am
Hi, I tried the procedure unfortunately with no result. I tested the CPU 5600g in another motherboard and everything is running. With the original 2400g both memory are running. Any idea what to try ?


Posted By: wino
Date Posted: 14 Aug 2024 at 5:26pm
Are you doing everything exactly as I described? Are you booting into Windows every time? Sometimes the boot process can take several minutes and the computer may restart several times during that time.

Which step of this procedure are you unable to complete?

-------------
AB350 Gaming-ITX/ac 10.31 BIOS | Ryzen 5 5600 | G.Skill Flare X 2x8GB @ 3466 14-14-14-28 | Zotac GTX 1050 Ti | Kingston KC3000 1 TB M.2 | SilentiumPC Supremo M2 Gold 550W V2 | Plywood case 24x22x21 cm


Posted By: tommyone
Date Posted: 14 Aug 2024 at 6:21pm
After plugging the 5600g cpu into the motherboard and turning on the power, the fans spin up running POST for about two minutes and then this process repeats without booting the BIOS. If one operating memory is inserted the system will boot. I have tested the processor in another X570 I AORUS ITX motherboard and it runs without problems.

I am doing exactly as described, will make a video this weekend.
I was still wondering if there will be a compatibility problem, because in the specification of supported cpu's it says 5600GT and I have a 5600G cpu ? I will be glad for any advice. :) Thanks

https://www.asrock.com/mb/AMD/Fatal1ty%20AB350%20Gaming-ITXac/index.asp#CPU" rel="nofollow - https://www.asrock.com/mb/AMD/Fatal1ty%20AB350%20Gaming-ITXac/index.asp#CPU


Posted By: wino
Date Posted: 15 Aug 2024 at 6:13am
Quote I was still wondering if there will be a compatibility problem, because in the specification of supported cpu's it says 5600GT and I have a 5600G cpu?

I don't think so, my processor isn't listed either ;)

-------------
AB350 Gaming-ITX/ac 10.31 BIOS | Ryzen 5 5600 | G.Skill Flare X 2x8GB @ 3466 14-14-14-28 | Zotac GTX 1050 Ti | Kingston KC3000 1 TB M.2 | SilentiumPC Supremo M2 Gold 550W V2 | Plywood case 24x22x21 cm


Posted By: wino
Date Posted: 23 Aug 2024 at 4:31am
On this page

https://www.asrock.com/MB/AMD/B550M-ITXac/index.asp#BIOS" rel="nofollow - https://www.asrock.com/MB/AMD/B550M-ITXac/index.asp#BIOS

it is written "To support Ryzen 5000 G-series processors, it requires to update the BIOS with Matisse, Renoir or Vermeer CPU".

Maybe this applies for your MB also?

-------------
AB350 Gaming-ITX/ac 10.31 BIOS | Ryzen 5 5600 | G.Skill Flare X 2x8GB @ 3466 14-14-14-28 | Zotac GTX 1050 Ti | Kingston KC3000 1 TB M.2 | SilentiumPC Supremo M2 Gold 550W V2 | Plywood case 24x22x21 cm



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net