Print Page | Close Window

RAM Overclocking - X370 Gaming K4

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=5396
Printed Date: 06 Feb 2025 at 4:47am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: RAM Overclocking - X370 Gaming K4
Posted By: mgilbert
Subject: RAM Overclocking - X370 Gaming K4
Date Posted: 22 Jun 2017 at 4:11pm
" rel="nofollow - I have an X370 Gaming K4, with 2X8 GB of Corsair Vengeance 3600 MHz RAM - single rank, Samsung chips...

It'll run at 2933 all day long.  I just discovered that it will almost run at 3200, with Gear Down disabled, and CR set to 2T.  It will boot, and will pass a round of MemTest86, but I get errors in Prime95.

I upped the voltage to 1.4, and loosened the timings to match the settings for 3600, and I still get Prime95 errors, almost immediately.  SoC is set to 1.1 volts, LLC at level 2.

What other settings should I fine tune, to get stable at 3200?



Replies:
Posted By: Xaltar
Date Posted: 22 Jun 2017 at 4:24pm
Try setting your ProcODT to 53.3ohms. That resolved my instability over 2666 and I am now running stable at 3466 on my 3600 kit.

-------------


Posted By: mgilbert
Date Posted: 22 Jun 2017 at 4:41pm
Originally posted by Xaltar Xaltar wrote:

Try setting your ProcODT to 53.3ohms. That resolved my instability over 2666 and I am now running stable at 3466 on my 3600 kit.

Well, that was worth a try, but it didn't help.  Prime95 kicked out one core with an error within a minute.  Not sure what else to try...  2933 isn't bad, but I'd like to get to 3600, just for the heck of it.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net