X370 Taichi Debug '00'
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=5467
Printed Date: 18 Jul 2025 at 12:16pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X370 Taichi Debug '00'
Posted By: Liddy
Subject: X370 Taichi Debug '00'
Date Posted: 29 Jun 2017 at 3:48pm
|
Im aware the '00' debug help says to ensure the CPU is installed correctly and to clear CMOS which I have done. I updated to the latest Taichi bios 2.4 when I first experienced this issue, the screen just turnt black and the debug info the MB flashed '00' so I rolled it back to 2.3. Later that night gaming again it happened, cleared the CMOS and it appeared to boot up, but with no display. I could hear the windows startup noises through the speakers. I swapped the graphics card with another computer, it worked fine. Put my graphics card back in and it worked no problems. I assumed the issue was too low a voltage on my CPU and streaming at the same time, I stopped streaming for a few days and bumped the voltage up a bit. It worked for a few days then again it happened tonight, didn't have to clear the CMOS it just posted. Upon reaching the desktop it notified me that AMD radeon Setting encountered an error and all setting were returned to default (I was running an underclock as my card is factory overclocked and it doesn't agree with PUBG). So it returns the GPU to a higher clock speed. I can go days without any issue then for no apparent reason it just seems to go, frustrating. My systems specs are: CPU: R7 1700 @ 3.5Ghz GPU: Sapphire Nitro+ OC RX 480 8GB RAM: Corsair Vengeance LPX 3200Mhz (2933Mhz) Motherboard: ASRock Taichi x370 All temperatures seem fine while gaming, CPU sits sub 60C and GPU hovers at high 70s in PUBG, about 60C in Overwatch, I've crashed in both. Any one have any ideas of how I could pin point the error with such a random problem, I can't seem to replicate it. |
Replies:
Posted By: wardog
Date Posted: 29 Jun 2017 at 4:05pm
|
" rel="nofollow - 60c hints at/indicates you're OC'ing. Yet you say 3.5GHz. That's seemingly too hot for stock. What CPU cooler you using? What PSU Make/Model/Age? What voltage on DRAM, SoC, and CPU? |
Posted By: Liddy
Date Posted: 29 Jun 2017 at 4:14pm
|
Hey, yeah it's only over clocked to 3.5Ghz as I found it gave me similar performance to stock with games, but slightly more with multithreaded apps. Stock my voltage was reaching a max of over 1.4v so I figure I'd see what I could run it at a constant clock speed/voltage for similar performance but more consistent voltage. Stressing while stock I was getting similar temperatures I believe, I'll double check again later. PSU is EVGA 650BQ 650W, less than a year old. The other 3 I will be get back to you later with when I'm at my computer to be sure. |
Posted By: wardog
Date Posted: 29 Jun 2017 at 4:50pm
Hey. While you're next to it post the memory Kit P/N and if it has it the revision located on the sticks too. That's unrelated, hopefully. |
Liddy wrote:Posted By: Xaltar
Date Posted: 29 Jun 2017 at 5:10pm
|
I get the 00 code on my Taichi my OC is too aggressive and heat causes a shutdown. I usually just hit the reset button and it posts fine, I then dial back my OC and try again. If you are getting this at stock then check your CPU cooler, it may not be mounted correctly or have some dirt between it and the CPU that is preventing proper heat transfer. ------------- 
|
Posted By: Liddy
Date Posted: 29 Jun 2017 at 5:13pm
No problem. |
Posted By: Liddy
Date Posted: 29 Jun 2017 at 5:21pm
" rel="nofollow -
I'll run it at stock for the next few nights and stream aswell to try and push it a bit. The cooler seems mounted properly, is a load temperature of 60C not pretty normal? Granted it reaches about 67C when stressing. |
Posted By: Star_Pilgrim
Date Posted: 29 Jun 2017 at 8:07pm
|
" rel="nofollow - No. Idle 35, load 48. 70 is worrisome area. Don't tell me you have a stock cooler on there? :/ If you want to OC ANY, get a new water cooler. Ryzens basically require it if you want to OC. Besides $70 bux for a liquid cooler is amazing investment if you want to go that route. |
Posted By: Liddy
Date Posted: 29 Jun 2017 at 8:39pm
" rel="nofollow -
Strange, mine idles about 32C but will prroach high 60's under a full load. When it was stock it was going over 70C I am currently using the stock Wraith Spire, I have a Corsair h100i V2, waiting on the bracket coming. |
Posted By: wardog
Date Posted: 29 Jun 2017 at 9:21pm
If you're running the processor voltage on Auto, don't. Set it manually. Auto pushes way too much voltage, and ramping as the load increases. |
Posted By: Liddy
Date Posted: 30 Jun 2017 at 2:34am
" rel="nofollow -
DRAM was set to 2933Mhz and 1.35v VDDCR_SOC Voltage was left on Auto CPU Voltage was set to 1.05v manually |
Posted By: howardstern
Date Posted: 30 Jun 2017 at 6:20am
|
I run my SOC at 1.1 volts on the same board and my VDDP at 1.1 I was able to get my 1800X at 4.05G running the core at 1.43V with the water cooler it never goes above 65C while running prime 95 for several hours. Try raising your SOC to 1.1 I think the default on the asrock boards is set to low.
|
Posted By: Liddy
Date Posted: 01 Jul 2017 at 9:24pm
|
Returned to stock and it ran perfectly for 2 nights, streamed an everything, not a single problem. Updated my driver's and entered a game and boom same thing, black screen with flashing '00'. Upon rebooting there was no video, I took the card out and put it back in, worked fine. |
Posted By: Liddy
Date Posted: 23 Jul 2017 at 2:35am
|
Just a bit of an update on this issue incase it helps someone in the future. My particular problems seems to have been unstable Ram profile. It would pass hours of stressing with 2933Mhz memory, but I would get the error every now and then. Since switching back to 2667Mhz it hasn't occured once. |
Posted By: ucsmfu
Date Posted: 05 Nov 2017 at 4:18pm
|
" rel="nofollow - I am the the same 00 error code as well. Screen would go black and I'll have to do a hard reset before my computer boots up again. Everything is stock and running at 30 degrees Celsius. Any idea what's causing this problem ? thanks
|
Posted By: datonyb
Date Posted: 05 Nov 2017 at 9:07pm
and your motherboard is ? and your cpu is ? and your ram make and model is ? and your PSU is ? and your windows version is ? and your hard drive is ? its very very hard to offer any help when we have no idea what system or parts your using ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: ucsmfu
Date Posted: 06 Nov 2017 at 3:16am
and your motherboard is ? Asrock X370 Taichi and your cpu is ? Ryzen 7 1700 and your ram make and model is ? Trident Z RGB 3200mhz 16 gb and your PSU is ? Thermaltake Toughpower DPS G RGB 650 Gold and your windows version is ? Windows 10 Pro 64 bit and your hard drive is ? 500gb Samsung Evo 850 Thanks
|
Posted By: datonyb
Date Posted: 07 Nov 2017 at 4:38am
|
try different ram or try running ram at 2133 or turn off the rgb software if its on then test to see if its stable ------------- [url=https://valid.x86.fr/jpg250] [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |