Board is super slow booting and bootlop
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=5469
Printed Date: 21 Dec 2024 at 9:43pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Board is super slow booting and bootlop
Posted By: demzkie
Subject: Board is super slow booting and bootlop
Date Posted: 29 Jun 2017 at 11:39pm
| Hello i have a Asrock Fatal1ty B250M, at first is has no problem then suddenly, it crashes and shutdown then after i boot it, the loading in the bios is about 30-50 sec before loading and when windows is loading the pc shutdown and restart |
Replies:
Posted By: demzkie
Date Posted: 29 Jun 2017 at 11:45pm
|
Intel G4560 Geil 4gb 850w
|
Posted By: ASRock_TSD
Date Posted: 30 Jun 2017 at 1:57pm
|
Dear Demzkie,
Thank you for choosing ASRock.
Regarding your case, we provide some suggestion to try: 1. Please load BIOS default to check if the system can work properly. Please press Del during POST to get into BIOS, press F9 to load BIOS default, press F10 to save and exit BIOS. 2. Please check your power supply is connected well, and all power cable is connected properly. 3. Please only install CPU, one stick memory, and system hard disk drive to check if the system can work properly. 4. Please install one stick memory on A1, B1, A2, and B2 to check if the system can work properly. 5. Please change another memory to try step 4. 6. Please reapply your CPU thermal grease, reinstall your CPU and check if your CPU socket pin is fine. 7. Please change another power supply to check if the system can work fine. 8. Please try to reinstall your operating system to check. 9. If possible, please change another CPU to check if the system can work properly.
Thank you! Yours truly, ASRock TSD |
Posted By: wardog
Date Posted: 30 Jun 2017 at 3:57pm
|
" rel="nofollow - That sounds like it's getting hot and shutting down. Is the fan(s) on your heatsink still spinning? If it has push-pins securing the heatsink to the motherboard check that they're all still "engaged' on/through the backside of the motherboard. |
Posted By: Xaltar
Date Posted: 30 Jun 2017 at 4:19pm
|
Also check your VRMs, if the VRM heatsinks are not getting enough airflow that could cause your issue too. ------------- 
|