ASROCK G41C-GS R2.0 - win10 compatibility
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=5481
Printed Date: 19 Jul 2025 at 1:46am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: ASROCK G41C-GS R2.0 - win10 compatibility
Posted By: jazabra
Subject: ASROCK G41C-GS R2.0 - win10 compatibility
Date Posted: 30 Jun 2017 at 3:36pm
|
" rel="nofollow - Hello, i need information. Is MB ASROCK G41C-GS R2.0 with OS windows 10 compatible? Thank for help. |
Replies:
Posted By: wardog
Date Posted: 30 Jun 2017 at 3:53pm
|
Yes it will. You might need to track down a driver or two. I don't think so though. |
Posted By: parsec
Date Posted: 01 Jul 2017 at 11:54am
|
I would be worried about the legacy BIOS that this board uses. It does not use UEFI firmware. If future Windows 10 updates require UEFI/GPT support, even if all the built in Windows 10 drivers work, you'll reach a point where you cannot run new Windows 10 updates. Also, I've see problems using Windows 10 with boards with newer chipsets than this board has. ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|
Posted By: dtsolutions78
Date Posted: 02 Oct 2020 at 1:39am
|
I've had one of these for a few years and could not use it because it would not support Windows 10. Recently in my spare time (long story short), I installed Windows 10 Home 64 bit and registered with Microsoft. I then changed the BIOS set up to have the PCIE1 slot as the primary display and installed an ATI Firegel v7100 dual DVI video card I had on the shelf. I then was able to successfully upgrade to Windows 10 Home 64 bit and install the latest upgrades. It's my conclusion that the G41C chipset/Windows 10 has an issue with the onboard video - and taking that out of the equations enables you to run Win10. ------------- DTSolutions78 |