AMD Motherboards - Help with KFA2 HOF 3600 / Killer SLI/ac

Print Page | Close Window

Help with KFA2 HOF 3600 / Killer SLI/ac

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=5611
Printed Date: 23 Dec 2024 at 10:34pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Help with KFA2 HOF 3600 / Killer SLI/ac

Posted By: Trender
Subject: Help with KFA2 HOF 3600 / Killer SLI/ac
Date Posted: 18 Jul 2017 at 12:37am

wardog wrote:

Jm62383 wrote:

Very soon is good...heck not so soon is good too I suppose as long as its an improvement lol.

"Improvement' may prove daunting as it's still memory dependent at this stage of the game.

But fingers crossed for ya when it does land.

Rest assured though. Everyone involved is working hard at it.

Oi wardog help me get my RAM to 3600 MHz, I got the same board as you, my mems are kfa2 hof 3600 samsung b-die.

Im running 3466 Mhz now althought looks like take more time to boot than 3334Mhz.

I tried 3600 with xmp and setting loosen latencys and Procodt from 40 to 60 ohms but it never boots. For stable I use 43 ohms on my rams

Replies:

Posted By: wardog
Date Posted: 18 Jul 2017 at 3:21am

Ok. I moved your post to better keeping in sync with you.

Let's begin here

Your KFA2 Kit. P/N HOF4CXLBS3600K17LD162K ?

Please grab AIDA64 and capture the "Extreme Memory Profile 2.0" data as I have below.
https://www.aida64.com/downloads

Also grab Thaiphoon Burner and post a capture from the Read tab.
http://www.softnology.biz/files.html

AIDA64 > Motherboard > SPD

Posted By: Trender
Date Posted: 18 Jul 2017 at 3:47am

wardog wrote:

Ok. I moved your post to better keeping in sync with you.

Let's begin here

Your KFA2 Kit. P/N HOF4CXLBS3600K17LD162K ?

Please grab AIDA64 and capture the "Extreme Memory Profile 2.0" data as I have below.
https://www.aida64.com/downloads

Also grab Thaiphoon Burner and post a capture from the Read tab.
http://www.softnology.biz/files.html

AIDA64 > Motherboard > SPD

Yeah its that model you said. Here its a screenshot from the aida but it only shows the mem default xmp profile.

So I also added the CPU-Z, the most tight I've got its 3466Mhz >14-14-14-14-34@1.40V DDR4 Power down disabled, and I need 43 OHms always for stability/boot. Gear down mode auto.