AB350 Pro4 Fan Control Setting
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=5729
Printed Date: 26 Dec 2024 at 7:50pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: AB350 Pro4 Fan Control Setting
Posted By: amdone2
Subject: AB350 Pro4 Fan Control Setting
Date Posted: 28 Jul 2017 at 7:06pm
|
" rel="nofollow - Hello! I have a Fan Control Panel with my Game Max Vega PC Case. In the Panel instruction there is a requirement: "CMOS is set into not to check CPU-FAN". This is necessary so that the board can control the fans. But I dont found such option in Bios settings. There are only different modes for fans. Can you help to solve this issue? Thanks a lot! |
Replies:
Posted By: parsec
Date Posted: 28 Jul 2017 at 11:13pm
Your PC case has a built in PWM fan hub that allows the four pin CPU PWM fan header on your board to control multiple fans that are connected to the PWM fan hub. It seems you have not connected the PWM fan hub to a PWM fan header on your board. There is no option in the UEFI/BIOS because a PWM fan hub in a PC case is not a standard feature on all PC cases. Do you have the PWM fan hub in your case connected to your board? You are not required to use the PWM fan hub, but for some reason Game Max shows that message as if it is an error. ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|
amdone2 wrote: