Print Page | Close Window

AB350M Pro4 Ryzen No Post/Boot

Printed From: ASRock.com
Category: Media&User's Review
Forum Name: AMD Motherboards
Forum Description: ASRock AMD Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=5732
Printed Date: 21 May 2024 at 5:16am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: AB350M Pro4 Ryzen No Post/Boot
Posted By: jethomas
Subject: AB350M Pro4 Ryzen No Post/Boot
Date Posted: 28 Jul 2017 at 11:56pm
" rel="nofollow - Just put together a new system. Got it to boot first time - did bios update right away from the bios itself (internet download). Came back later to blank screen. Now no post at all.

Things i've tried:
-Replace/move Ram sticks
-re-seat cpu
-different monitors
-different GPUs
-clear CMOS

Any suggestions or is thing dead and I need to RMA it?

Specs:
AB350M Pro4
Ryzen 1700x 
Corsair 3200 DDR4 2x8
GTX 1070
Corsair H60 water cooler
Samsung m.2 drive

Thanks in advance!



Replies:
Posted By: parsec
Date Posted: 29 Jul 2017 at 11:03am
" rel="nofollow -
Originally posted by jethomas jethomas wrote:

Just put together a new system. Got it to boot first time - did bios update right away from the bios itself (internet download). Came back later to blank screen. Now no post at all.

Things i've tried:
-Replace/move Ram sticks
-re-seat cpu
-different monitors
-different GPUs
-clear CMOS

Any suggestions or is thing dead and I need to RMA it?

Specs:
AB350M Pro4
Ryzen 1700x 
Corsair 3200 DDR4 2x8
GTX 1070
Corsair H60 water cooler
Samsung m.2 drive

Thanks in advance!


Did you get the PC to boot into an installed OS, or did you simply get it to complete POST into the UEFI/BIOS?

Since you used Internet Flash, did you have a USB Flash drive in one of the USB ports on the IO panel? That is part of using Internet Flash.

Given what you said you did to fix the problem, which involved shutting down the PC and removing power, the board is probably bricked. Turning off the board after an incomplete, interrupted, or failed UEFI/BIOS update will result in a corrupted UEFI/BIOS, sorry to say.

The following is from the "How to Update" help instructions for the Instant Flash update method, but applies to all update types:

If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.

-------------
http://valid.x86.fr/48rujh" rel="nofollow">


Posted By: jethomas
Date Posted: 30 Jul 2017 at 2:43am
No, only to the bios screen - didn't even get to OS level installation first. While it was downloading the update i switched inputs on the monitor back to my MacBook. When I returned, that was when it was just a black screen. I did have a usb key in it at the time.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net