Samsung 960 EVO M.2 is not detected.
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=5864
Printed Date: 24 Apr 2024 at 1:52am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Samsung 960 EVO M.2 is not detected.
Posted By: younker
Subject: Samsung 960 EVO M.2 is not detected.
Date Posted: 18 Aug 2017 at 2:37pm
|
"Samsung 960 EVO M.2" is not detected by A320M UEFI. UEFI Main -> Advanced -> Storage Configuration -> M2_1: Not Detected |
Replies:
Posted By: znd
Date Posted: 19 Aug 2017 at 3:22pm
|
I had the same problem. Turned out I hadn't pressed the SSD all the way in to the connector. It should make a click when it's all the way in. |
Posted By: ASRock_TSD
Date Posted: 24 Aug 2017 at 5:17pm
|
Dear younker, Greetings, this is ASRock TSD. Regarding your question, we config a system to perform the test, Samsung 960 EVO works fine on A320M. Please refer attached picture. A320M BIOS P3.00  SATA Mode: RAID Mode  SATA Mode: AHCI Mode  We also provide some suggestions for verifying: 1. Please refer to the user manual (page.27) from the link below to clear CMOS to try(Please shut down the AC power). http://asrock.pc.cdn.bitgravity.com/Manual/A320M.pdf" rel="nofollow - http://asrock.pc.cdn.bitgravity.com/Manual/A320M.pdf 2. Reboot the system then press[F11] to check the Boot Menu. 3. If possible, please install other M.2 HDD to verify. 4. Please install your 960 EVO to another system to check if it could work fine. Thanks! All the best, ASRock TSD |