AIO water pump pwer plug
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=5886
Printed Date: 31 Oct 2024 at 7:20am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: AIO water pump pwer plug
Posted By: dab18351
Subject: AIO water pump pwer plug
Date Posted: 21 Aug 2017 at 10:23am
I have a Z270M Pro4 MOBO. Where do I put the power plug for my CM Master Liquid Pro 120 AIO water pump? On the chassis fan pins or use the CPU fan pins? 
|
Replies:
Posted By: ASRock_TSD
Date Posted: 25 Aug 2017 at 2:54pm
|
" rel="nofollow - Dear Dab18351,
Thank you for choosing ASRock.
Regarding your case, please check
your water pump is 3-pin or 4-pin, and just connect to the suitable fan connector.
If your water pump is 3-pin, please connect to the CPU 3-pin fan connector. If your water pump is 4-pin,
please connect to the 4-pin CPU fan connector. Note: the chassis fan
connector also can monitor CPU temperature by BIOS setting.
Thank you! Yours truly, ASRock TSD |