Print Page | Close Window

AB350M Pro4 How to switch from ACPI to IDE

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=5945
Printed Date: 25 Dec 2024 at 12:56pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: AB350M Pro4 How to switch from ACPI to IDE
Posted By: kick7177
Subject: AB350M Pro4 How to switch from ACPI to IDE
Date Posted: 29 Aug 2017 at 5:54pm
" rel="nofollow - Hello, I get a hard drive and I want to switch from ACPI to IDE, how can i do this?



Replies:
Posted By: parsec
Date Posted: 29 Aug 2017 at 9:47pm
" rel="nofollow -
Originally posted by kick7177 kick7177 wrote:

Hello, I get a hard drive and I want to switch from ACPI to IDE, how can i do this?


I'm sure you mean from AHCI to IDE, for the SATA mode. The short answer is, you cannot select IDE mode anymore on a new mother board. The IDE option has been removed (finally!) since it is not necessary.

AHCI mode was designed for standard, mechanical hard drives (HDDs.) Is your HDD not a SATA drive, and uses the old ribbon cable connection? If it is, you must be using a SATA to IDE adapter.

If your HDD is a SATA HDD, then you should use AHCI mode. It makes the drive faster. Using IDE mode, if you could, will make any SATA HDD slower.



-------------
http://valid.x86.fr/48rujh" rel="nofollow">


Posted By: ASRock_TSD
Date Posted: 31 Aug 2017 at 4:28pm
" rel="nofollow -
Dear kick7177,

Greetings, this is ASRock TSD.


AB350M Pro4 only supports RAID (RAID 0, RAID 1 and RAID 10), NCQ, AHCI and Hot Plug functions.

AMD Promontory B350 chipset does not support IDE mode.

We suggest installing AHCI mode on the system.


Thanks!

All the best,
ASRock TSD



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net