" rel="nofollow - Just got a new rig up and going, but I'm having issues with my RGB headers.. The board I am using is an Asrock x370 Taichi.. Using the Phanteks Enthoo Pro M SE with 2x RGB Halo Fan Frames, and the Phanteks RGB Led Strip combo set.. I have the 2x RGB Halo Fans connected with 1x phanteks RGB motherboard adapter into header #1, and the light strips connected with a seperate phanteks RGB motherboard adapter into header #2 for RGB. My problem is that I seem to have an obscene amount of whiteish hue in any color that I choose, and some strobing\flickering if I am not on the absolute most white color using the asrock RGB LED app, or via bios on v3.0. Anyone care to give me a pointer or two? I'm a bit lost here and I'd love to use the colors! RGB Headers are plugged in accordingly, grey +12v into +12v, r g b etc.. I'm stumped and hope I don't have a faulty RGB controller. My motherboard LEDs change just fine in the bios or with an app, however anything connected to my RGB Headers I can't change the colors too, they're stuck with a white hue. These are the RGB lighting products I'm using; http://www.phanteks.com/PH-LEDKT.html , and http://www.phanteks.com/Halos.html
Is the x370 RGB Headers truely 12v, green, red, blue? (GRB) If so that maybe the problem and I'm completely spunked. The phanteks use 12v, red green blue (RGB) so.. why would ASRock design their RGB Headers this way if that's true? I can't find a compatible 12v GRB case light strip to save my life, maybe someone knows?
Any red, blue, or green values inside the BIOs or ASRock RGB Program makes the LEDs a blueish-white. I've tried disabling the green, and red channel and using just blue and I still have the same issue.
|