Ryzen Master vs BIOS Settings
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=6005
Printed Date: 22 Dec 2024 at 1:48pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Ryzen Master vs BIOS Settings
Posted By: smrtech
Subject: Ryzen Master vs BIOS Settings
Date Posted: 05 Sep 2017 at 10:27pm
|
" rel="nofollow - With my AB350M and Ryzen 177+ADATA 3200 (2x8GB) and then using Ryzen Master to adjust the RAM and CPU settings, I get a stable system and memory at 3200, but using the slightly adjusted voltages and settings it provided in Ryzen Master - this seems normal. And then tweaking and restarting the computer from there, use new settings fine. I was able to benchmark with CINEBENCH to see how I am doing. All good and I see how it works. Shut the computer off and next day it won't POST, it does a few restarts and memory goes back to 2400 and boots. So how do I adjust the BIOS/RAM settings vs. Ryzen Master settings? So even if I am not gaming, I still get a reasonably fast system? Seems like you have to use RM to keep adjust keep the settings, restart with new settings/profile, and use that. |
Replies:
Posted By: Joe_User
Date Posted: 05 Sep 2017 at 11:25pm
|
Assuming that you have better results using Ryzen Master than the default memory OC profile in BIOS... |
Posted By: smrtech
Date Posted: 05 Sep 2017 at 11:55pm
|
" rel="nofollow - OK, that makes sense, I really want to force it in the BIOS to be permanent behavior. What is RTM? |
Posted By: datonyb
Date Posted: 06 Sep 2017 at 12:37am
|
or plan B the ram settings are whats the issue on your system the timings you can get from a warm boot just wont work on a cold boot due to start up volatges etc being just that bit lower,and electrical resistances of warm/hot parts being different to the cold boot i can get my ram to drop down to cl 14 timings all the time any time ad sit there doing whatever task or stress test i want .......but since april and several bios revisions and attempts with bios tweaks IT WILL NOT COLD BOOT at cl 14  it is usual to find a problem trying to cold boot settings that work fine on warm restarts with ryzen some will and some wont 'have it' i helped a friend the other week overclock his crappy corsair ram from factory 2400 to 2933 and yes of course his starts cold every dam time .....grrrrrrr not my ram that cost twice as much no anyways to sum up try a little more volts on the ram and /or some looser timings eg cl18 instead of 16 or whatever yours is ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: nangu
Date Posted: 06 Sep 2017 at 3:02am
Agree with this. In my case, I can't cold boot with my memory at the advertised spped: 1.35v It works fine and stable at that voltage, but it doesn't cold boot. If I set it at 1.375v the cold boot is resolved tough :-( Too many quirks on this platform :-)
|
datonyb wrote: