Intel Motherboards - C236 WSI - iGPU not working after BIOS update

Print Page | Close Window

C236 WSI - iGPU not working after BIOS update

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=6029
Printed Date: 11 Nov 2025 at 8:50am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: C236 WSI - iGPU not working after BIOS update

Posted By: JDBall
Subject: C236 WSI - iGPU not working after BIOS update
Date Posted: 09 Sep 2017 at 11:05am

" rel="nofollow - Hoping that someone can help:

I recently built a NAS using the Asrack C236 WSI motherboard. Everything was going great until I upgraded the BIOS from P1.00 to P.2.10.

When I first built this box I installed a Skylake I3-6100 to use as a stopgap until the Kaby Lake Xeon E3's were released. Now available, I upgraded the BIOS to support Kaby Lake.

Since I upgraded the system, with my Skylake I3, I only get display output from an Nvidia 1050ti installed in the PCI slot, even with Onboard selected as the Primary Graphics Adapter in BIOS. I have also tried setting IGPU Multi-Monitor to Enabled/Disabled but neither setting makes any difference.

Prior to the upgrade, I used the iGPU as primary and was able to pass through the 1050ti to a Windows 10 VM with everything working perfectly.

I have not been able to try a Kaby Lake CPU since the update as I don't want to shell out for a CPU that may not work as required.

Are there any other settings in BIOS that I need to change to make this work?

Can I safely roll-back BIOS to P1.00?

Anything else that I may have have missed?

I contacted Asrack support through the form on their WWW site around 4 weeks ago and again yesterday but as yet did not receive a reply.