X370 Professional Gaming memory question..
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=6108
Printed Date: 26 Apr 2024 at 7:35pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X370 Professional Gaming memory question..
Posted By: brucer
Subject: X370 Professional Gaming memory question..
Date Posted: 17 Sep 2017 at 10:15pm
|
" rel="nofollow - I had been running an msi x370 gaming pro carbon, and had also ran a b350 gaming pro carbon using gskill ripjawsV 3200 memory (f4-3200c16D-16GVK) timings of 16-16-16-36 and it worked fine in both of those msi boards with the agesa 1.0.0.6a updated bios'. I wanted to move up to this high end asrock board and recently did, but my memory wont post at rated speed using the xmp profile 2, it goes into the boot loop and resets to 2133mhz after several reboots.. and its a pain to get into the bios, feels like a shot in the dark to get back in the bios. I'm running the latest bios version 3.1 Will this memory work at its rated speed? I look at the memory qvl list and its not listed or Asrock hasnt updated the list with the agesa 1.0.0.6a update. If this memory will not work at all at its rated speed, what memory will work? I would like 16gb 3200mhz or faster. Thanks. |
Replies:
Posted By: MisterJ
Date Posted: 18 Sep 2017 at 12:01am
|
brucer, I cannot answer your question but suggest running non-qualified memory is asking for disappointment whether it works in an MSI board or not. ripjaws is an Intel memory and I would strongly suggest you consider G.Skill FlareX for AMD. I suspect you can find 3200 on the Qualified list. If you want to work on these (BIOS adjustments), then wait for the many memory knowledgeable here such as datonyb - certainly worth a try! Enjoy, John. EDIT: Please post more complete specifications as in my signature. ------------- Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD |
Posted By: brucer
Date Posted: 18 Sep 2017 at 12:51am
|
i had some more memory out of my old I5-6600k system that worked, its 3000mhz and it posted at the 1500mhz so I got the memory issue out of the way for now. xmp profile 2 worked fine.. System is booting up good now.. I tried to overclock the 1700 and get nothing.. I set it to overclock mode, leave the bclock on auto, set the frequency to 3700, set vcore at like 1.35, then i move down to the voltage part and set it to fixed and set it to 1.35 also.. then save and exit.. upon booting into windows cpuid shows its running at 1550mhz.. I've tried many different settings, nothing is working, keeps booting into windows at 1550mhz.. Any ideas, I'm guessing I'm missing a setting somewhere... I disable c6, disable global c-state and disable amd cool&quiet.. If I set it to auto it works as intended, just when i manuall make changes it boots into windows at 1550mhz. ------------- Asrock x570 Taichi, Ryzen3800x, 32gb Gskill Royal 36000mhz@ 3733mhz, Samsung 250gb 970evo plus for OS drive, Sabrent Rocket 1tb nvme storage drive. |
Posted By: datonyb
Date Posted: 18 Sep 2017 at 1:28am
|
" rel="nofollow - i use the pstates to overclock AND set the voltage i find it easier and more precise heres a vid for the taichi it wont be much different for yours at all the 1700 should get to 3.9 at 1.3 to 1.35 volts https://www.youtube.com/watch?v=52Tw-wcT7o4 the p state method is the second half of video (7 mins 30 ish seconds in) ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: datonyb
Date Posted: 18 Sep 2017 at 1:30am
|
get back to me if you want some help trying to get the ripjaws working at 3200 ------------- [url=https://valid.x86.fr/jpg250] [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: datonyb
Date Posted: 18 Sep 2017 at 3:01am
|
" rel="nofollow - brucer tonight this guy kindly has provided some info rather detailed as well on how he got his ripjaws working http://forum.asrock.com/forum_posts.asp?TID=6110&PID=36269趭 theres a link to his screenshots of bios ------------- [url=https://valid.x86.fr/jpg250] [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: brucer
Date Posted: 18 Sep 2017 at 7:27pm
" rel="nofollow -
When i go to overclock in the overclock tweaker.. When I set frequency to 3800, then i set the voltage at 1.325, then in the voltage section I set the vcore there also at 1.325 but when i save to bios and reboot the cpu runs at 1550mhz when I check it with cpuz, what would cause this? Why isnt the overlcok taking? I've ran this 1700 at 3.8 and 3.9 ghz in an msi b350 gaming pro carbon, so I know it'll do it.. ------------- Asrock x570 Taichi, Ryzen3800x, 32gb Gskill Royal 36000mhz@ 3733mhz, Samsung 250gb 970evo plus for OS drive, Sabrent Rocket 1tb nvme storage drive. |
datonyb wrote:Posted By: brucer
Date Posted: 18 Sep 2017 at 8:12pm
|
" rel="nofollow - daytonyb, I also went in a overclocked using the pstates like brian from techcity did and that overlcok took.. I also bumped my memory up to 1533mhz and that worked also.. What would be the reason a conventional overclock would not work? ------------- Asrock x570 Taichi, Ryzen3800x, 32gb Gskill Royal 36000mhz@ 3733mhz, Samsung 250gb 970evo plus for OS drive, Sabrent Rocket 1tb nvme storage drive. |
Posted By: datonyb
Date Posted: 18 Sep 2017 at 9:00pm
|
i think/recall adjusting BOTH voltages causes this issue im a tad busy to try and find the source at the moment it might have been here or on one of the two overclockers threads i read about this bug on my oc tweaker page my cpu volts are all set to auto i just adjust the llc on that page for cpu and soc and also bump the soc volts up 'FIXED' TO 1.1 VOLTS ------------- [url=https://valid.x86.fr/jpg250] [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: parsec
Date Posted: 18 Sep 2017 at 10:56pm
Your board's UEFI is a bit different than other ASRock AM4 boards, but what you've described sounds like the result of differences in the apparently three places you set the VCore. Also you must be sure that the CPU/core speeds are set to the same frequency in the OC Tweaker screen, and in the PState0 profile. Changing the frequency in one screen (PState0) may not do it in the other (OC Tweaker.) Set CPU frequency in OC Tweaker with PState0 set to Custom. Set the VCore in OC Tweaker, but not in PState0. I don't know how your board's Voltage Configuration screen that you described fits into this, but just be sure these two are the same. The CPU power saving options should not affect an OC, I have all of them enabled and my OC works fine. ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|
Posted By: brucer
Date Posted: 21 Sep 2017 at 7:51am
I have a question concerning cold boot issues with memory.. Last night I ran all night at 3.9ghz 1.35vcore, my 3000mhz memory at 2933mhz xmp profile and i put the voltage at 1.36and llc at level 2, ran benchmarks many times, gamed for a couple hours and no issues..System ran as well or better than it ever has... But, When I turned my computer on this morning it would not boot with a debug code and i didnt remember the code, it was an 06 or 07 or 09.. What will help the cold boot issue? even got this if it matters.. https://valid.x86.fr/41tiyr" rel="nofollow">  ------------- Asrock x570 Taichi, Ryzen3800x, 32gb Gskill Royal 36000mhz@ 3733mhz, Samsung 250gb 970evo plus for OS drive, Sabrent Rocket 1tb nvme storage drive. |
Posted By: lowdog
Date Posted: 21 Sep 2017 at 8:34am
|
Enable the option "dram training" in bios. ------------- X399 Fat Pro Gaming bios 3.10 - TR4 1900X - 64GB G-SKILL TridentZ F4-3200C14Q-64GTZ @ 3133MHz - Vega 64 AIO with EK block - WC Custom loop - 1500W Silverstone PSU - yay |
Posted By: lowdog
Date Posted: 21 Sep 2017 at 8:35am
You need to have the option "dram training" enabled in bios. ------------- X399 Fat Pro Gaming bios 3.10 - TR4 1900X - 64GB G-SKILL TridentZ F4-3200C14Q-64GTZ @ 3133MHz - Vega 64 AIO with EK block - WC Custom loop - 1500W Silverstone PSU - yay |
Posted By: brucer
Date Posted: 21 Sep 2017 at 9:42am
I'll check and see if its on , of not i'll enable it. Thank you ------------- Asrock x570 Taichi, Ryzen3800x, 32gb Gskill Royal 36000mhz@ 3733mhz, Samsung 250gb 970evo plus for OS drive, Sabrent Rocket 1tb nvme storage drive. |
Posted By: brucer
Date Posted: 21 Sep 2017 at 10:18am
------------- Asrock x570 Taichi, Ryzen3800x, 32gb Gskill Royal 36000mhz@ 3733mhz, Samsung 250gb 970evo plus for OS drive, Sabrent Rocket 1tb nvme storage drive. |
Posted By: brucer
Date Posted: 21 Sep 2017 at 11:12pm
|
Booted fine this am.... I also ordered some of the gskill flare-x 3200mhz memory.. ------------- Asrock x570 Taichi, Ryzen3800x, 32gb Gskill Royal 36000mhz@ 3733mhz, Samsung 250gb 970evo plus for OS drive, Sabrent Rocket 1tb nvme storage drive. |
Posted By: J Z
Date Posted: 21 Sep 2017 at 11:34pm
|
Hi, Take DDR4 memory with Samsung chips ;) ------------- Kind Regards, JZ https://shop.JZelectronic.de - Der Shop mit ausgesuchter ASRock Profi Hardware https://www.facebook.com/asrock.de |
Posted By: datonyb
Date Posted: 22 Sep 2017 at 1:49am
|
bruce if i could give you the cure-all answer for the cold boot ram issue i would as soon as i find it for myself  seriously i find the same issue (when i try to overclock or overtighten my timings its fine all day, but the cold boot is the killer) we could do with a cold boot volt boost type option in bios ------------- [url=https://valid.x86.fr/jpg250] [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |