Ryzen 1600x Taichi
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=6124
Printed Date: 26 Dec 2024 at 12:12am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Ryzen 1600x Taichi
Posted By: Poncho
Subject: Ryzen 1600x Taichi
Date Posted: 19 Sep 2017 at 3:12pm
|
" rel="nofollow - Hello, would like some thoughts as to what is happening with my Taichi board and 1600x with overclocking. If the cpu voltage under frequency is left at stock 1.375, I cannot get a stable OC and most of the time the PC wont even post. If zi lower the voltage to 1.1, 1.2 or 1.3 and use offset to raise voltage then it overclocks very well. For example if I used 1.2 amd added an offset to get 1.3 it works perfect. But if I use stock 1.375 and use offset to minus or add voltage it never works or rarely. What is wrong? I have all the latest drivers and bios.
|
Replies:
Posted By: Poncho
Date Posted: 19 Sep 2017 at 3:14pm
|
" rel="nofollow - Also the earlier bios never had the cpu voltage option under frequency, why wad it added? Sigh I am thinking I should have got a Asus ROG
|
Posted By: J Z
Date Posted: 19 Sep 2017 at 4:01pm
Hi,
this is an AMD thing and affects all board manufacturers ;)
Simply set the CPU clock with Pstates0 and increase with offset.
FID: a0 = 4.00 GHz / 9c = 3.90 GHz / 98 = 3.80 GHz
-------------
Kind Regards,
JZ
https://shop.JZelectronic.de - Der Shop mit ausgesuchter ASRock Profi Hardware
https://www.facebook.com/asrock.de
|
|