AMD Motherboards - Question for taichi users

Print Page | Close Window

Question for taichi users

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=6134
Printed Date: 26 Dec 2024 at 12:19am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Question for taichi users

Posted By: Asingo
Subject: Question for taichi users
Date Posted: 20 Sep 2017 at 6:52am

" rel="nofollow -

1) Does anyone here with taichi have this memory CMK16GX4M2B3200C16?

At what speed can you run it?

2) I noticed some users with taichi boards that are talking about electrical static noise that is coming from the board. Is this frequent problem with this board?

Board is stable?

Replies:

Posted By: Asingo
Date Posted: 21 Sep 2017 at 12:32am

" rel="nofollow - bump

- Do you know maybe which version of corsair ram is mine? I use CMK16GX4M2B3200C16. On taichi QVL is listed this memorys: CMK16GX4M2B3000C15 ver:5.30, CMK16GX4M2B3000C15 ver 4.23

and CMK16GX4M2B3000C15 ver3.32. Mine is between them? All that are listed on 3000mhz C15 so I should be able to hit minimum 3000mhz with current bios?

- Will I with wifi on taichi have good signal since my router is on the floor below, 7 meters away from my pc?

Posted By: quicknick
Date Posted: 21 Sep 2017 at 7:29am

I have the exact same memory. Not one but two kits for a total of 32GB. Runs flawless at 3066 with bios 2.40.

With older bioses I was stuck at 2666 with all four dimms, or 3200 very unstable using a single kit. I haven't tested a single kit with the newer bioses, but I imagine stable 3200 or even more is now possible.

Regarding other questions, I find the board to be stable and quiet. No noise from the board itself, also audio output is clean and of quite good quality. Cannot say about wifi since I haven't used it, in fact I did not install the antennas...

Posted By: Asingo
Date Posted: 21 Sep 2017 at 3:22pm

" rel="nofollow -

quicknick wrote:

I have the exact same memory. Not one but two kits for a total of 32GB. Runs flawless at 3066 with bios 2.40.

With older bioses I was stuck at 2666 with all four dimms, or 3200 very unstable using a single kit. I haven't tested a single kit with the newer bioses, but I imagine stable 3200 or even more is now possible.

Regarding other questions, I find the board to be stable and quiet. No noise from the board itself, also audio output is clean and of quite good quality. Cannot say about wifi since I haven't used it, in fact I did not install the antennas...

you just load xmp profile or did you need to raise soc voltage, timmings and other things?

Posted By: quicknick
Date Posted: 22 Sep 2017 at 9:11am

Enable xmp and bump down frequency from 3200 to 3066, I don't remember altering other settings. Though maybe I did and forgot, I'm not that young anymore and haven't touched the bios since June :)

I think soc voltage goes to 1.1 automatically with the higher freqs.