Print Page | Close Window

SOC Voltage

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=6195
Printed Date: 26 Dec 2024 at 12:32pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: SOC Voltage
Posted By: Poncho
Subject: SOC Voltage
Date Posted: 27 Sep 2017 at 3:23am
" rel="nofollow - Hey what SOC voltage are people using with their X370 Taichi. I cannot get my memory with CPU overclock stable without the SOC at 1.2v, won't post. Is this too high? 



Replies:
Posted By: datonyb
Date Posted: 27 Sep 2017 at 5:11am
its the limit

i run mine at 1.1 volts and then set the voltage 'fixed' and the LLC to level 2

software monitoring indicates this keeps it very very rigid to 1.1 volt


-------------
[url=https://valid.x86.fr/jpg250][/url]

3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold


Posted By: Poncho
Date Posted: 27 Sep 2017 at 6:08am
" rel="nofollow - Thanks. Whats your overclock? My Taichi doesn't seem to like my X Flare 3200 ram



Posted By: datonyb
Date Posted: 28 Sep 2017 at 1:12am
the same one in my cpuz signature Tongue

ok my system is
ryezn 7 1700 at 3.9 ghz running 1.30 volts and llc level2
gskill tridentz 3200 cl15 (2x8gb) running at 3200 since start of april


-------------
[url=https://valid.x86.fr/jpg250][/url]

3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold


Posted By: brucer
Date Posted: 28 Sep 2017 at 3:38am
Originally posted by Poncho Poncho wrote:

" rel="nofollow - Hey what SOC voltage are people using with their X370 Taichi. I cannot get my memory with CPU overclock stable without the SOC at 1.2v, won't post. Is this too high? 


 I had trouble with my x370 professional gaming cold booting with 3200mhz flarex.. I had to increase my soc voltage to 1.15.. I started at 1.15625 and reduced it to 1.15.. Its been working fine at this soc voltage..  I'm going to incrementally reduce it until it wont boot, then up it a little..  Then again its running stable and temps are good so I may just leave it at the 1.15v..


-------------
Asrock x570 Taichi, Ryzen3800x, 32gb Gskill Royal 36000mhz@ 3733mhz, Samsung 250gb 970evo plus for OS drive, Sabrent Rocket 1tb nvme storage drive.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net