1.70 + New NVME driver X399 Taichi my experience
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=6247
Printed Date: 26 Dec 2024 at 12:41pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: 1.70 + New NVME driver X399 Taichi my experience
Posted By: Tom.N
Subject: 1.70 + New NVME driver X399 Taichi my experience
Date Posted: 04 Oct 2017 at 2:31am
|
" rel="nofollow - I updated to the new 1.70 BIOS without checking that I needed to delete my RAID0 (Data drive only) array but when I got into windows my array was still there. I backed it up anyway and installed the new 9.0.0.88 NVME driver and windows couldn't start. I went ahead and deleted my array and still couldn't get into windows in RAID or AHCI mode. Reverted to 1.50 BIOS and restored from previous config in windows advanced startup and back to normal now. Wondering if I should try again and if so should start with the driver then install the new 1.70 BIOS or the reverse? ------------- X399/Taichi/64GB Gskill RGB/ NVME Samsung 960 EVO/SATA RAID0 3TB |
Replies:
Posted By: datonyb
Date Posted: 04 Oct 2017 at 4:25am
|
heres a bit of a walkthrough and warnings and download links http://www.guru3d.com/files-details/nvme-raid-drivers-for-amd-ryzen-threadripper-x399.html" rel="nofollow - http://www.guru3d.com/files-details/nvme-raid-drivers-for-amd-ryzen-threadripper-x399.html ------------- [url=https://valid.x86.fr/jpg250]  [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
Posted By: MisterJ
Date Posted: 04 Oct 2017 at 5:09am
|
" rel="nofollow - Tom.N, I would suggest you hold fire for now. I would also recommend you always get your drivers and RAID SW from AMD. Please see this thread: http://forum.asrock.com/forum_posts.asp?TID=6236&PID=37330釒 What Floppy/F6 drivers are you using? Enjoy, John. ------------- Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD |
Posted By: Tom.N
Date Posted: 04 Oct 2017 at 5:26am
|
This was an existing install of win10, I set it up without using the F6 driver as my NVME is not a RAID. after install I updated the NVME driver to samsungs express driver 2.2. I guess thats why windows wouldn't boot with AMD's NVME driver. I updated the BIOS hoping for a little more compatability with my GSkill Trident RGB 64GB 3600 Ram. right now I can only get it to 2933 ------------- X399/Taichi/64GB Gskill RGB/ NVME Samsung 960 EVO/SATA RAID0 3TB |
Posted By: MisterJ
Date Posted: 04 Oct 2017 at 5:39am
|
Tom.N, I doubt BIOS 1.70 will help your memory. It contains the same AGESA as the last BIOS, 1.0.0.3. Enjoy, John. ------------- Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD |