Intel Motherboards - H110 Pro BTC+ - Boot only once after CMOS Reset

Print Page | Close Window

H110 Pro BTC+ - Boot only once after CMOS Reset

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=6294
Printed Date: 29 Jul 2025 at 10:47pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: H110 Pro BTC+ - Boot only once after CMOS Reset

Posted By: kelrich
Subject: H110 Pro BTC+ - Boot only once after CMOS Reset
Date Posted: 09 Oct 2017 at 1:22pm

After assembled the system (specs below), it can only be boot up once after clearing CMOS (unplugged the battery and short the CMOS jumper to reset position up to 4 hrs). I managed to install Windows 10 and this issue still exist. When it fails to boot up, I can see the LAN lights on and the CPU fan spinning but monitor is not displaying anything. Again, I will need reset CMOS before I can boot up once. I tried unplugged every power cable, RAM, harddrive and same thing would occur. I haven't even put GPU yet so pretty sure nothing to do with the GPU or risers. Any help/suggestions will be appreciated.

System Specs:

CPU: Intel BX80662G4400 Pentium Processor G4400, 3.3 GHz

HDD: Crucial MX300 275GB SATA 2.5 Inch Internal Solid State Drive

RAM: CORSAIR Vengeance LPX 16GB (2x 8GB) DDR4 DRAM 3000MHz C15

Power Supply: Corsair HXi High Performance ATX12V 1200 Power Supply Series CP-9020070

GPU: N/A as I haven't even plug any of them in

Replies:

Posted By: mardesja
Date Posted: 11 Oct 2017 at 11:02pm

" rel="nofollow - Hello, I've same setup of you and I've the same problem.

My system work fin for 2 week and now I can't restart my motherboard.

Do you find something about this problem?

Best Regards