Update to Bios 3.06 idle temps much higher
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=63541
Printed Date: 19 Sep 2024 at 6:19pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Update to Bios 3.06 idle temps much higher
Posted By: hankhepler
Subject: Update to Bios 3.06 idle temps much higher
Date Posted: 14 Sep 2024 at 4:08am
|
All, Just installed Taichi Lite MB with AMD Ryzen 9 7800x3d with Arctic Freezer III 360 AIO 3 days ago. Before update from 3.02 to 3.06, idle temps were 42-44C, after udating bio to 3.06 current idle temps are 57-60C. I checked and made sure CPU2/WP was set to water pump in BIOS. Even set to ECO using Ryzen Master and still no change. I went back and installed 3.02 and still no change. Very confused. Any thoughts or things I need to check/change? Thanks! Not OC, only running EXPO for DDR5. |
Replies:
Posted By: Xaltar
Date Posted: 14 Sep 2024 at 1:53pm
|
That's a bit odd. Try clearing CMOS: https://forum.asrock.com/forum_posts.asp?TID=630&title=how-to-clear-cmos-via-battery-removal" rel="nofollow - https://forum.asrock.com/forum_posts.asp?TID=630&title=how-to-clear-cmos-via-battery-removal Could be some corrupt sensor data after the flash. ------------- 
|
Posted By: hankhepler
Date Posted: 14 Sep 2024 at 2:30pm
|
Thanks did that AND made sure to set my AIO in BIOS (which was not set after flash and "load default settings"). It was a DUH moment for me. Thanks for the response!! H |
Posted By: Xaltar
Date Posted: 14 Sep 2024 at 4:37pm
That would do it  Enjoy the build  -------------
|